Horizon Global 76336 Instrucciones De Instalación página 10

6. Detach lower fascia tabs - Using flat head screwdriver, remove (2) plastic
rivets from lower fascia tab. Detach the tabs from end panel.
8. Tighten all M12x1.25x35 CL8.8 fasteners with torque wrench to 76 ft -lb (103 N*m).
9. Raise muffler back into position- Reattach the rubber hanger removed in step 5. Remove the support for exhaust.
10. Reattach lower fascia tabs – Using the included cable ties (item 5), reattach the fascia tabs to the hitch cross tube to secure.
©2020 Horizon Global Americas Inc. - Printed in Mexico
7. Install hitch – Raise and align hitch into position over existing weldnuts and
loosely install M12 bolts (item 1), conical washer (item 2), flat washer (item 3),
and lock washer (item 4) to the hitch, as shown in Figure 4. Note: Only forward
hole on passenger side uses flat and lock washer.
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Sheet 10 of 30 76336NP 06-18-20 Rev. A