Before The First Use; Contents Of Packing; Intended Use; Assembly - Batavia CROC LOCK BT-CL001 Manual De Usuario

• Use the Croc Lock only for the intended
purposes. Any other use is considered an
abuse. The manufacturer is not liable for
damage or injury caused by misuse.
• Only use accessories as recommended
in the user manual, the use of other
accessories can lead to injury.
• Store the workbench in a dry place that
is protected from dust, dirt and frost.
Keep the workbench out of the reach of
children.

3. Before the first use

Before mounting, please check all parts for
completeness. If parts are missing, do not
return back the work bench but contact our
support department.
Dispose of packaging materials or store it
out of reach of children. Plastic bags etc.
may become a deadly toy for children.

4. Contents of packing

1× Croc Lock
1× Carrying handle at the back
1× Instruction manual

5. Intended use

The Croc Lock is a multifunctional work-
bench for many applications such as clamp-
ing of doors, frames, fencing, ceiling plates,
bicycles, car parts and all kinds of other
materials.

6. Assembly

Place the Croc Lock upside down on the
6.1
ground, unlock the rear leg lock lever (6)
and slide the rear leg (7) from the stor-
age position in the direction as shown
(see Fig. B).
Fully fold out the rear leg (see Fig. C).
6.2
Slide the rear leg into position and lock
6.3
the rear leg locking lever (6) (see Fig. D).
Place the rear stability foot (9) on the
6.4
rear leg until it clicks into position and
secure the foot with the locking lever (8)
(see Fig. E).
Fold out the foot pedal (13) (see Fig. F)
6.5
until it clicks into position.
Fold out the front legs (12). Unlock the
6.6
front leg locks (15) and place the front
legs in position. (see Fig. G + H).
Place the Croc Lock upright. Check if all
6.7
legs are firmly and in the correct posi-
tion and check if everything is locked
(see Fig. H).
Install the rear carry handle (5) Attach
6.8
the intermediate tube between the
bracket and secure the handle with the
included bolt and lock button.
The Croc Lock can be moved easily
6.9
using the carrying handle on the front
and back of the Croc Lock.

7. Folding

Enter the assembly instructions in reverse
order from:
Place the Croc Lock upside down on the
7.1
ground. Unlock the front leg locks (15)
and fold in the front legs.
Unlock the foot pedal lock (14) and fold
7.2
the foot pedal in.
Unlock the rear stability foot (9) and
7.3
place it in the storage position.
Unlock the rear leg lock lever (6) and
7.4
place the rear leg (7) in the storage
position and lock the rear leg lock lever
again.
The rear leg (7) can be used to lift the
7.5
Croc Lock into the folded position. It is
also possible to lift the Croc Lock in the
folded position with the carrying handle
(5) at the rear (see Fig. J).

8. Operation

Clamping / locking
8.1
(see Fig. K)
• Place the workpiece against the fixed jaw
(1) on the front.
• Slide the moving jaw (4) against the
workpiece. The moving jaw can be
moved by hand or with the foot pedal.
• Slide the lock / unlock button (17) down
to lock.
• Press the foot pedal (13) down to secure
the workpiece securely.
Loosening / unlocking
8.2
(see Fig. L)
• Slide the lock / unlock button (17) up.
• Press the foot pedal (13) down until it
"clicks"
English
7