Specifications And Dimensions - MasterCool MMB10 Manual De Operación

ELECTRICAL
Electrical wiring on your unit is not required as the unit has
been wired at the factory. For your future reference, the wiring
diagram in Figure 7 shows rocker switches, two-speed motor,
capacitor and pump.
COOLING PAD REPLACEMENT
The cooling pads should be changed at least every two years.
Check and clean them at the beginning of the season and
clean and reverse them in the middle of the season. The pads
may need to be replaced more frequently depending on local
conditions and the maintenance schedule followed.
Replacement Instructions:
To remove pad assemblies from the unit, lift up, pull out and then
down. Lay the metal side down on a flat surface and remove the
pad retainers. The MasterCool pad can now be removed. Rinse
off pad assembly, then install new MasterCool pad and retainer.
Replacement filter pads are available at your cooler dealer. See
pictures 7-10.
Picture 7

SPECIFICATIONS AND DIMENSIONS

Model
MMB10 22
MMB12 26.5 25
MMB14 34
MMPC12 26.5 26
Model Motor
MMB10 1/8 HP
MMB12 1/3 HP
MMB14 1/2 HP
MMPC12 1/3 HP
1450 E. Grant Street, Phoenix, Arizona U.S.A.
www.AdobeAir.com 602-257-0060
All manuals and user guides at all-guides.com
Picture 8
Water Shipping
Dimensions (in)
Capacity Weight
A B C D
20 27.5 32.7 6.4 Gallons
33 38.7 7.2 Gallons 119 lb
31 35.4 41 14.5Gallons 130 lb
31 35.7 7.2 Gallons
Frequency Volts
60 Hz 120
60 Hz 120
60 Hz 120
60 Hz 120
AP059719
Figure 7
Picture 9
60 lb
D C
95 lb
Current
3.0 Amps
5.5 Amps
7.5 Amps
5.5 Amps
Av. Carr. Miguel Alemán #6061, Col. América, Cd. Guadalupe, Nuevo León, México, C.P. 67130
2/2008
Picture 10
B
A
www.Impco.com.mx (81)-8144-5440
4