Charging The Battery - Unitech PA600 Guía De Referencia Rápida

All manuals and user guides at all-guides.com

Charging the Battery

Charge the PA600 for at least 16 hours prior to initial use. After the initial charge, the
PA600 will recharge to full capacity in about 4 hours. Only use the PA600 USB Charging
Cable or the PA600 Cradle for charging the device.
1
Press and hold the USB Charging Cable's Release Buttons while connecting to
the PA600 (1).
2
Plug the AC Adapter Cable into the USB Charging Cable's power jack (2).
3
Plug the other end of the AC Adapter Cable into an electrical outlet (3)..
1
Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
3
2