Level And Spn Functions - KPS TherCam384 Manual De Usuario

LEVEL and SPN functions

1. On the real-time imaging interface, click the temperature data area at top
or bottom of the color palette (the yellow box area as shown in Fig. 1), to enter
the "manual dimming mode", and lock the dimming parameters (as shown in
Fig. 2).
2. LEVEL adjustment: adjust "LEVEL" by the "up" or "down" button in the
"five-way joystick" button; the "up" button is used to increase the dimming
parameters of TMax and TMin at the same time, the "down" button is used
to reduce the dimming parameters of TMax and TMin at the same time. The
picture dimming varies synchronously during adjustment.
3.SPAN adjustment:
(1) Press the "left" button in the "five-way joystick" button to adjust SPAN, in
the way of reducing TMax and increasing TMin; the picture dimming varies
synchronously during adjustment.
(2) Press the "right" button in the "five-way joystick" button to adjust SPAN,
in the way of increasing TMax and reducing TMin; the picture dimming varies
synchronously during adjustment.
4. Double-click the blank area on the screen to return to the automatic
dimming mode.
42 User Manual
Fig.1 Fig.2