Computer Settings For Connection To Ir Analysis Software - KPS TherCam384 Manual De Usuario

Port connection
Connect to the computer through USB cable, open "My Computer" and view the
information of internal storage disk. Click "Enter internal storage". The specific
route is ...\SABRESD-MX6DQ\TF card\DCIM\GCamera\SourceImage.
Storage Location
SD card
SD card
Note: the file name with a prefix of IRI refers to an infrared image while that with
a prefix of VIS refers to a visible image.

Computer settings for connection to IR analysis software

Before connection to the IR analysis software, the driver shall be installed.
if the PC is Windows 7 operating system, please refer to Windows 7 driver
installation method, and if PC is win10 operating system, please refer to win10
driver installation method.
Windows 7 driver installation method:
1. Connect the computer with device reliably through USB cable;
2. Click "USB real-time video" at the device to activate the function of USB
real-time video, as shown below.
File Format
IrCamrea/SD card/DCIM/GCamera/
Images
SourceImage
IrCamrea/ SD card/DCIM/GCamera/
Videos
SourceVideo
Storage Path
User Manual 69