Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

All manuals and user guides at all-guides.com
Model 25881
5.8GHz Dual Handset
Speakerphone/Answering
System User's Guide

Publicidad

Tabla de contenido
loading

Resumen de contenidos para GE 25881

  • Página 1 All manuals and user guides at all-guides.com Model 25881 5.8GHz Dual Handset Speakerphone/Answering System User’s Guide...
  • Página 2: Equipment Approval Information

    All manuals and user guides at all-guides.com Equipment Approval Information Your telephone equipment is approved for connection to the Public Switched Telephone Network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA.
  • Página 3: Interference Information

    All manuals and user guides at all-guides.com Interference Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and () This device must accept any interference received, including interference that may cause undesired operation.
  • Página 4: Tabla De Contenido

    All manuals and user guides at all-guides.com Table of Contents ....2 ..........17 quipmEnt pprovAl nformAtion etting ......3 ..........18 ntErfErEncE nformAtion oCal (HAc) ....3 ) ..18 EAring ompAtibility egistration orDless anDset .............3 ..........19 icEnsing efault etting .........19 fcc rf r ..3 Asic pErAtion AdiAtion...
  • Página 5 All manuals and user guides at all-guides.com iD e ...........35 witChing etween PeakerPhone anD aller rrors ...........36 ............25 EmotE ccEss anDset ........26 .........36 nterCom Peration sing the anDset ......26 ......36 aking an nterCom nswering ystem nDiCator ....26 ...........36 nswering an nterCom emory eCeiVing an...
  • Página 6: Egin

    All manuals and user guides at all-guides.com Introduction CAUTION: When using telephone equipment, there are basic safety instructions that should always be followed. Refer to the IMPORTANT SAFETY INSTRUCTIONS provided with this product and save them for future reference. Before You Begin Parts Checklist Make sure your package includes the items shown here.
  • Página 7: Nstallation

    All manuals and user guides at all-guides.com Installation Digital Security System Your cordless phone uses a digital security system to protect against false ringing, unauthorized access, and charges to your phone line. INSTALLATION NOTE: Some cordless telephones operate at frequencies that may cause or receive interference with nearby TVs, microwave ovens, and VCRs.
  • Página 8: Base Layout

    All manuals and user guides at all-guides.com Handset and Charge Cradle Layout Display caller ID/vol -/+ charge cradle with talk/end/ (caller ID/volume -/+ power adaptor call back (button) button) trans format/answerer (transfer button) (button) redial (button) flash/prog (flash/program del/chan (delete/ button) channel button) mem/conf...
  • Página 9: Harge

    All manuals and user guides at all-guides.com Installing the Phone Installing the Handset Battery NOTE: You must connect the handset battery before using the cordless handsets. CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. appoved Nickel-Cadmium (Ni-Cd) battery model 5-2459, which is compatible with this unit.
  • Página 10: Nstalling The Hone

    All manuals and user guides at all-guides.com Installing the Phone Choose the best location to install your base and handset charge cradles. Your base and handset charge cradles should be placed on a level surface such as a desk or table top, or you may mount the base on a wall.
  • Página 11: Oice I Nstructions

    All manuals and user guides at all-guides.com Wall Mounting the Base The base is packaged with the pedestal attached in desktop mode. To mount the base on the wall: 1. Turn the base over and remove the pedestal. . Rotate the pedestal a half turn, and align it with the bottom of the base. 3.
  • Página 12 All manuals and user guides at all-guides.com Answering System Operation Recording the Outgoing Announcement For best results when recording, you should be about nine inches from the microphone, and eliminate as much background noise as possible. 1. Make sure the answering system is ON. .
  • Página 13: Creening Alls From The Ase

    All manuals and user guides at all-guides.com Screening Calls from the Base You can screen incoming calls by waiting for the caller to leave a message (to hear who it is), then pick up the handset, or press talk/end/call back on cordless handset or the speaker/call back button on the base to talk to the caller.
  • Página 14: Erasing Messages

    All manuals and user guides at all-guides.com Erasing Messages You may erase messages three ways: To erase a message while it is playing 1. Press and release the respective mailbox button (play/stop 1 or play/stop  or play/stop 3) . Press review and skip button to select and play the message you want to erase. 3.
  • Página 15: Anguage

    All manuals and user guides at all-guides.com Telephone Set Up There are twelve programmable menus available: Language, Display Contrast, Rings to Answer, Security Code, Ringer Level, Ringer Tone, Set Day, Set Time, Local Area Code, Link Cordless Handset, and Default Setting. NOTE: Changing menu settings on the handset will only change the settings on the handset, and changing menu settings on the base will only change the settings on the base.
  • Página 16: Isplay Ontrast

    All manuals and user guides at all-guides.com Display Contrast NOTE: This setting may only be made with the base. 1. Press the program/flash button until SET CONTRAST shows in the display. 1 is the default setting. . Press 1,  or 3 on the base touch-tone pad to enter your selection, or use the caller id (- or +) button on the base to scroll to your selection.
  • Página 17: Ringer Tone

    All manuals and user guides at all-guides.com . Use the touch-tone pad to enter your new 3-digit security code. For example, press the 6, , and 8 number keys for security code 68. The default security code is 123. 3. Press program/flash again to store your selection. You will hear a confirmation tone. Ringer Level NOTE: This setting may only be made with the base.
  • Página 18: Local Area Code

    All manuals and user guides at all-guides.com 1. Press the program/flash button until SET DAY shows in the display. Monday is the default setting. . Use the caller id (- or +) button to select the current day. 3. Press program/flash until SET TIME shows on the display. 12:00 AM is the default setting.
  • Página 19: Default Setting

    All manuals and user guides at all-guides.com 3. Press program/flash on the base to confirm handset is linked to the base. WAITING HANDSET REGISTRATION shows in the display. 4. Press the flash/prog button on the handset until LINK BASE? shows in the display. NO is the default setting.
  • Página 20: Ase S Peakerphone

    All manuals and user guides at all-guides.com Corded Handset 1. Lift the handset. . When finished, put the handset back on the cradle to hang up. Base Speakerphone 1. Press the speaker/call back button. . When finished, press speaker/call back to hang up. NOTE: For more information, refer to Speakerphone Operation section of this manual.
  • Página 21: Call Timer

    All manuals and user guides at all-guides.com Call Timer After you press talk/end/call back on the cordless handset (or lift the corded handset, or press the speaker/call back button on the base), the built-in call timer shows in the display and begins counting the length of time of the call. Auto Standby Placing the cordless handset in the charge cradle while the handset is off the hook (or during a call) automatically hangs up the handset.
  • Página 22: Last Number Redial

    All manuals and user guides at all-guides.com 1. Press the page/intercom button to put the line on hold. PAGING HANDSET LINE ON HOLD shows in the display. . Press the speaker/call back button or put back corded handset to cradle to transfer the call.
  • Página 23: P Aging The

    All manuals and user guides at all-guides.com Corded Handset 1. Lift the corded handset. . Press the redial button. - Or - 3. Press the redial button first, then lift the corded handset. If you get a busy signal, and want to keep dialing the number, press the redial button to quickly redial the number.
  • Página 24: Ordless Andset )

    All manuals and user guides at all-guides.com Mute To have a private, off-line conversation, use the mute feature. The party on the other end of the line cannot hear you, but you can still hear them. 1. Press the mute button on the base. The mute indicator turns on and MUTE ON shows in the display.
  • Página 25: All With S Peakerphone

    All manuals and user guides at all-guides.com Note the following guidelines when using the speakerphone. • Stay reasonably close to the phone so that you can be clearly heard by the person to whom you are speaking. • The SPEAKER indicator is on when the speakerphone is in use. Receiving a Call with Speakerphone 1.
  • Página 26: Ntercom Peration

    All manuals and user guides at all-guides.com Intercom Operation A two-way intercom is possible between the base and cordless handset without tying up the telephone line and since the telephone line is not used, you can still receive incoming calls. NOTE: There is no conference and intercom features between handsets.
  • Página 27 All manuals and user guides at all-guides.com Using Intercom with a Telephone Call During a telephone call, you can use the intercom/paging function to page cordless handset and set up a private (-way) intercom conversation with another user while the telephone call is placed on hold. Or, you can create a 3-way conversation between the telephone caller, the base, and the cordless handset.
  • Página 28: Storing A Name And Number In Memory

    All manuals and user guides at all-guides.com Memory The cordless handset and base each have their own separate memory storage areas. Store ten 15-character names and 4-digit telephone numbers in the handset and base memories. Storing a Name and Number in Memory 1.
  • Página 29: Storing A Redial Number

    All manuals and user guides at all-guides.com Storing a Redial Number 1. Make sure the phone is OFF (not in TALK mode). . Repeat step 1 through 6 in Storing a Name and Number in Memory. 3. Press redial to display the redial number and name. 4.
  • Página 30: Ialing A Tored Umber

    All manuals and user guides at all-guides.com Dialing a Stored Number Handset: Make sure the phone is ON by pressing the talk/end/call back button on the cordless handset. 1. Press the mem/conf button. . Press the desired memory location button (0-9). The stored telephone number dials automatically.
  • Página 31: Caller Id (Cid)

    All manuals and user guides at all-guides.com The Number For Memory Location Long Distance Access Number Authorization Code Frequently called long distance number Handset: Make sure the phone is ON. 1. Press mem/conf and then press 7. . When you hear the access tone, press mem/conf and then press 8. 3.
  • Página 32: Call Waiting Caller Id

    All manuals and user guides at all-guides.com Call Waiting Caller ID Provided you subscribe to Call Waiting Caller ID service from your phone company; if you receive an incoming call and you are already on the phone, a beep indicates the presence of a Call Waiting call on the line.
  • Página 33: Storing Cid Records In Internal Memory

    All manuals and user guides at all-guides.com • Press the caller id + button (on base) or the caller ID/vol + button (on cordless handset) to review oldest call records and scroll to newer call records. When you reach the oldest record, the display shows END OF LIST. As you review call records, the display shows you the following information for each call: •...
  • Página 34: Dialing A Caller Id Number

    All manuals and user guides at all-guides.com Dialing a Caller ID Number When reviewing any call record in the Caller ID memory, you can dial back the caller’s number. 1. Make sure the phone is OFF (not in talk mode). .
  • Página 35: Deleting The Current Caller Id Record

    All manuals and user guides at all-guides.com NOTE: If you find it necessary to dial all local calls with the area codes included press program/flash button on base or flash/prog on handset until SET AREA CODE appears, then enter 000. If the number is corrupted, such as a number in a name or an alphabetical character in a number, an error tone comes from the handset and the number won’t dial.
  • Página 36: Remote Access

    All manuals and user guides at all-guides.com Remote Access This section explains two types of remote access: using the cordless handset to access the answering system and accessing the answering system from another phone. You may access the answering system on the base with the handset buttons. You may also access your answering system from any touch-tone phone by entering a 3-digit security code after you hear the outgoing announcement.
  • Página 37 All manuals and user guides at all-guides.com Accessing the Answering System from Another Location You can access your answering system from any touch-tone phone by entering your 3-digit security code after you hear the outgoing announcement. 1. Dial the phone number the answering system is connected to. .
  • Página 38: Changing The Battery

    All manuals and user guides at all-guides.com Changing the Battery CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. appoved Nickel-Cadmium (Ni-Cd) battery model 5-2459, which is compatible with this unit. 1. Make sure handset is OFF (not in TALK mode) before you replace battery. .
  • Página 39: Headset And Belt Clip Operation

    All manuals and user guides at all-guides.com Headset and Belt Clip Operation Connecting an Optional Headset to the Handset For hands free conversation, connect the headset (optional) to the HEADSET jack as shown. The handset receiver and microphone are disabled when the headset is connected.
  • Página 40: C All

    All manuals and user guides at all-guides.com ENTER NUMBER Prompt telling you to enter a telephone number in one of the 10 memory locations. ENTER NAME Prompt telling you to enter the name in one of the 10 memory locations. ERROR Caller information has been interrupted during transmission or the phone line is excessively noisy.
  • Página 41: Andset Ound Ignals

    All manuals and user guides at all-guides.com Handset Sound Signals Signal Meaning A long warbling tone (with ringer on) Signals an incoming call Three short beeps Page signal One short beep (every 7 seconds) Low battery warning Troubleshooting Guide Telephone Solutions No dial tone •...
  • Página 42: Attery

    All manuals and user guides at all-guides.com • You may have too many extension phones on your line. Try unplugging some phones. • Check for dial tone. If no dial tone is heard, see No dial tone above. You experience static, noise, or fading in and out •...
  • Página 43: Olutions

    All manuals and user guides at all-guides.com Caller ID Error Message • The unit displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates the presence of noise on the line. No Caller ID •...
  • Página 44: General Product Care

    All manuals and user guides at all-guides.com General Product Care To keep your unit working and looking good, follow these guidelines: • Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). •...
  • Página 45 All manuals and user guides at all-guides.com Index Connecting the Corded Handset 10 Connecting the Telephone Line 10 Accessing the Answering System from Another Location 37 Accessory Information 48 Default Setting 19 Answering an Intercom Call 6 Deleting All Caller ID Records 35 Answering a Call 19 Deleting the Current Caller ID Record 35 Answering System Indicator 36...
  • Página 46 All manuals and user guides at all-guides.com Ringer Level 17 Ringer Tone 17 Language 15 Ringer Volume Control 1 Last Number Redial  Rings to Answer 16 Leaving a Memo 14 Leaving Message 1 Licensing 3 Screening Calls from the Base 13 Limited Warranty 47 Screening Calls from the Handset 13 Local Area Code 18...
  • Página 47 All manuals and user guides at all-guides.com Limited Warranty What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year, from date of purchase. (The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.) What we will do: •...
  • Página 48: Accessory Information

    All manuals and user guides at all-guides.com Limitation of Warranty: • The warranty stated above is the only warranty applicable to this product. All other warranties, express or implied (including all implied warranties of merchantability or fitness for a particular purpose) are hereby disclaimed.
  • Página 49 All manuals and user guides at all-guides.com Modelo 25881 Serie 5.8 GHz Auricular Inalámbrico Doble y Altavoz Alámbrico con Sistema de Mensajes Guía del Usuario...
  • Página 50: Información Sobre La Aprobación De Equipo

    All manuals and user guides at all-guides.com Información Sobre la Aprobación de Equipo El equipo de su teléfono esta aprobado para la conexión con la red Telefónica Pública (Public Switched Telephone Network) y cumple con los requisitos establecidos en las secciones 15 y 68 de las Reglas y Regulaciones de la FCC y con los Requerimientos Técnicos para Equipos de Terminales Telefónicas (Technical Requirements for Telephone Terminal Equipment), publicado por ACTA.
  • Página 51: Información De Interferencias

    All manuals and user guides at all-guides.com Información de Interferencias Este artefacto cumple con la Parte 15 de las Reglas de la FCC. Su funcionamiento es sujeto a las dos condiciones siguientes: (l) Este artefacto no puede causar interferencia dañosa, y (2) Este artefacto debe aceptar cualquier interferencia recibida, incluyendo interferencia que puede causar un funcionamiento no deseado.
  • Página 52 All manuals and user guides at all-guides.com Tabla de Contenido ........16 nformacIón obre la probacIón de quIpo ódigo de eguridad .....3 ..........17 nformacIón de nterferencIaS iveL deL imBre (cca) ...3 ..........17 ompatIbIlIdad con udífonoS ono deL imBre ............3 ....17 IcenSIng rogramar La echa á...
  • Página 53 All manuals and user guides at all-guides.com ........24 istema ontestador Lmacenar rchivos deL dentificador de ........24 ....33 Peración deL Ltavoz Lamadas en La emoria nterna eciBir una Lamada con eL arcar un Úmero deL dentificador de ............25 ............34 Ltavoz Lamadas acer una Lamada con eL orrar eL...
  • Página 54: Introducción

    All manuals and user guides at all-guides.com Introducción CUIDADO: Cuando utilice equipo telefónico, hay instrucciones básicas de seguridad que siempre deben seguirse. Refiérase a la guía de INSTRUCCIONES DE SEGURIDAD IMPORTANTES provista con este producto y guárdela para referencia futura. Antes de Comenzar Lista de Partes Asegúrese que su empaque incluya los artículos ilustrados aquí.
  • Página 55: Instalación

    All manuals and user guides at all-guides.com Instalación Sistema Digital de Seguridad Su teléfono inalámbrico usa un sistema de seguridad digital para evitar el timbrado falso, el uso no autorizado y cargos a su línea telefónica. NOTA SOBRE LA INSTALACIÓN: Algunos teléfonos inalámbricos operan a frecuencias que pueden causar o recibir interferencia con aparatos de televisión, hornos de microondas, hornos, o videocaseteras que se encuentren cerca de este aparato.
  • Página 56: Formato Del Auricular Y Del Cargador

    All manuals and user guides at all-guides.com Formato del Auricular y del Cargador talk/end/call back Pantalla (botón llamar/terminar /regresar llamada) caller ID/vol -/+ trans (botón (botón identificador de base de carga intercomunicación/ llamada/volumen -/+) transferir) format/answerer (botón formato/ redial (botón contestadora) volver a marca) flash/prog...
  • Página 57: Para Instalar El Teléfono

    All manuals and user guides at all-guides.com Para Instalar el Teléfono Para Instalar la Batería del Auricular NOTA: Usted debe conectar la batería del auricular antes de usar los auriculares inalámbricos. PRECAUCION: Para reducir el riesgo de fuego o lastimaduras personales, use solamente la batería de Ni’quel-Cadmio (Ni-Cd) modelo 5-25 aprobado por Thomson Inc.
  • Página 58: Para Conectar La Corriente Ac (Eléctrica)

    All manuals and user guides at all-guides.com Para Instalar el Teléfono Escoja la mejor localización para instalar la base y el cargador del auricular. La base y el cargador deben ser chocados sobre una superficie plana como un escritorio o una mesa, o usted puede montar la base sobre la pared.
  • Página 59: Montaje De La Base Sobre Pared

    All manuals and user guides at all-guides.com Montaje de la Base sobre Pared La base está empacada con el pedestal instalado en modalidad para superficie plana. Para montar la base sobre la pared: 1. Volteé la base de cabeza y quite el pedestal. 2.
  • Página 60: Operación Del Sistema Contestador

    All manuals and user guides at all-guides.com Operación del Sistema Contestador Para Grabar el Anuncio Saliente Para mejores resultados, usted debe estar aproximadamente a nueve pulgadas del micrófono, y eliminar tanto ruido de fondo como le sea posible. 1. Asegúrese que el sistema contestador esté activado (ON). 2.
  • Página 61: Para Filtrar Llamadas Desde La Base

    All manuals and user guides at all-guides.com Para Filtrar Llamadas desde la Base Usted puede filtrar las llamadas entrantes simplemente esperando a que la persona que llama deje su mensaje (para saber quién es), después levante el auricular, o después oprima el botón talk/end/call back en el auricular inalámbrico o el botón speaker/call back en la base para hablar con la persona que llama.
  • Página 62: Para Borrar Mensajes

    All manuals and user guides at all-guides.com Para Borrar Mensajes Usted puede borrar mensajes en la base de tres maneras: Para borrar un mensaje mientras está en reproducción: 1. Presione y libere el botón de buzón respectivo (play/stop 1 o play/stop 2 o play/stop 3) 2.
  • Página 63: Programación Del Teléfono

    All manuals and user guides at all-guides.com Programación del Teléfono Hay doce menús programables disponibles: Idioma, Contraste de la Pantalla, Timbres para Contestar, Código de Seguridad, Nivel del Timbre, Tono del Timbre, Programación de Fecha, Programación de Hora, Clave de Área Local, Auricular de Enlace Inalámbrico, y Programaciones de Fábrica.
  • Página 64: Contraste De La Pantalla

    All manuals and user guides at all-guides.com Contraste de la Pantalla NOTA: Esta programación puede hacerse únicamente desde la base. 1. Oprima el botón para program/flash hasta que la indicación de contraste aparezca en la pantalla PROGRM CONTRASTE. La programación de fábrica es 1. 2.
  • Página 65: Nivel Del Timbre

    All manuals and user guides at all-guides.com 2. Utilice el teclado de tono para inscribir su nuevo código de seguridad de 3 dígitos. Por ejemplo, oprima las teclas del 6, 2, y 8 para el código de seguridad 628. El código de seguridad programado de fábrica es 123.
  • Página 66: Clave De Área Local

    All manuals and user guides at all-guides.com 1. Oprima el botón program/flash hasta que la indicación PROGRAME DIA aparezca en la pantalla. La programación de fábrica es Monday. 2. Utilice el botón caller id (‑ o +) para seleccionar el día actual. 3.
  • Página 67: Programación De Fábrica

    All manuals and user guides at all-guides.com 3. Oprima nuevamente el botón program/flash en la base para confirmar que el auricular está enlazado con la base. La indicación REGISTRO AURIC EN ESPERA aparece en la pantalla. 4. Oprima el botón flash/prog en el auricular hasta que la indicación ENLAZAR BASE aparezca en la pantalla.
  • Página 68: Altavoz En La Base

    All manuals and user guides at all-guides.com Auricular Alámbrico 1. Levante el auricular. 2. Cuando haya terminado, ponga nuevamente el auricular en su sitio para colgar. Altavoz en la Base 1. Oprima el botón speaker/call back. 2. Cuando haya terminado, oprima nuevamente el botón speaker/call back para colgar. NOTA: Para mayor información, refiérase a la sección Operación del Altavoz en este manual.
  • Página 69: Temporizador (Timer)

    All manuals and user guides at all-guides.com Temporizador (Timer) Después de que usted ha oprimido el botón talk/end/call back en el auricular inalámbrico (o levantado el auricular alámbrico, u oprimido el botón speaker/call back en la base), el temporizador integrado aparece en la pantalla y empieza a contar la duración de la llamada. Auto Alerta Si usted coloca el auricular sobre la base, mientras el auricular está...
  • Página 70: Transferencia De Llamada Del Auricular Inalámbrico A Otro Auricular Inalámbrico/Base

    All manuals and user guides at all-guides.com 1. Presione el botón page/intercom para colocar la línea en retención. LOCALIZAR AURICULR LINEA EN ESPERA se muestra en la pantalla. 2. Presione el botón speaker/call back o vuelva a colocar el auricular alámbrico en la base para transferir la llamada.
  • Página 71: Localizando El Auricular Inalámbrico

    All manuals and user guides at all-guides.com Auricular Alámbrico 1. Levante el auricular alámbrico. 2. Oprima el botón redial. ‑ O ‑ 3. Presione el botón redial primero, luego levante el auricular alámbrico. Si usted escucha la señal de ocupado, y quiere seguir marcando ese número, oprima el botón redial para volver a marcar ese número rápidamente.
  • Página 72: Sistema Contestador

    All manuals and user guides at all-guides.com Enmudecedor Para tener una conversación privada fuera de la línea, utilice la función del enmudecedor. La persona al otro lado de la línea no puede escucharle, pero usted todavía puede escucharles a ellos. 1.
  • Página 73: Para Recibir Una Llamada Con El Altavoz

    All manuals and user guides at all-guides.com Siga las siguientes pautas cuando utilice el altavoz: • Quédese razonablemente cerca del teléfono para que pueda ser escuchado claramente por la persona con la que está hablando. • El indicador SPEAKER está iluminado cuando el altavoz está en uso. Para Recibir una Llamada con el Altavoz 1.
  • Página 74: Operación Del Interfono

    All manuals and user guides at all-guides.com Operación del Interfono Una llamada bi‑direccional es posible entre la base y el auricular inalámbrico sin ocupar la línea telefónica y como el teléfono no está en uso, usted puede todavía recibir llamadas entrantes. NOTA: No hay características de conferencia e intercomunicación entre auriculares.
  • Página 75: Para Utilizar El Interfono Con Una Llamada Telefónica

    All manuals and user guides at all-guides.com Para Utilizar el Interfono con una Llamada Telefónica Durante una llamada usted puede utilizar la función de interfono/ localizador para llamar al auricular alámbrico y establecer una conversación privada (de 2 personas) con otro usuario mientras la llamada telefónica está...
  • Página 76: Para Almacenar Un Nombre Y Número En La Memoria

    All manuals and user guides at all-guides.com Memoria El auricular y la base tienen localizaciones para almacenar números de memoria separadas. Diez nombres de 15 caracteres y números de 24 dígitos pueden ser almacenados en las memorias del auricular y base. Para Almacenar un Nombre y Número en la Memoria 1.
  • Página 77: Para Almacenar Un Número De Volver A Marcar

    All manuals and user guides at all-guides.com Para Almacenar un Número de Volver a Marcar 1. Asegúrese que su teléfono esté en modalidad de apagado (OFF) (no en modalidad de hablar ‑TALK). 2. Repita el paso 1 al 6 en Para Almacenar un Nombre y Número en la Memoria. 3.
  • Página 78: Para Marcar Un Número Almacenado

    All manuals and user guides at all-guides.com Para Marcar un Número Almacenado Auricular: Asegúrese que el teléfono esté activado (ON) oprimiendo el botón talk/end/call back en el auricular inalámbrico. 1. Oprima el botón mem/conf. 2. Oprima el botón de la localización de memoria deseada (0‑9). El número almacenado se marca automáticamente.
  • Página 79: Funciones Del Identificador De Llamadas (Caller Id)

    All manuals and user guides at all-guides.com El Número Para Localización de Memoria Número de Acceso de Larga Distancia Código de Autorización Número de larga distancia llamado frecuentemente Auricular: Asegúrese de que el teléfono esté activado (ON). 1. Oprima el botón mem/conf y después oprima el 7. 2.
  • Página 80: Identificador De Llamada En Espera

    All manuals and user guides at all-guides.com Identificador de Llamada en Espera Suponiendo que usted está suscrito al servicio de Identificador de Llamada en Espera a través de su compañía telefónica; si usted recibe una llamada entrante y usted está ya en el teléfono, una señal sonora indica que la presencia de Llamada en Espera llamada invita la línea.
  • Página 81: Almacenar Archivos Del Identificador De Llamadas En La Memoria Interna

    All manuals and user guides at all-guides.com • Oprima el botón caller ID + (en la base) o el botón caller ID/vol + (en la auricular inalámbrico) para revisar los archivos el más viejos y después ir hacia más nuevos. Cuando usted llegue al fin de la lista, la pantalla indica que es FIN DE LISTA.
  • Página 82: Para Marcar Un Número Del Identificador De Llamadas

    All manuals and user guides at all-guides.com Para Marcar un Número del Identificador de Llamadas Mientras usted revisa los archivos del Identificador de Llamadas, usted puede llamar al número telefónico que se muestra en la pantalla. 1. Asegúrese que el teléfono esté desactivado (OFF) (no en modalidad para hablar). 2.
  • Página 83: Para Borrar El Archivo Actual Del Identificador De Llamadas

    All manuals and user guides at all-guides.com 5. Oprima el botón talk/end/call back en el auricular o el botón speaker/call back en la base. El número se marca automáticamente. NOTA: Si usted encuentra que es necesario marcar todas las llamadas locales con las claves de área incluidas oprima el botón program/flash en la base o el botón flash/prog en la auricular hasta que la indicación PROG AREA LOCAL aparezca, y después inscriba 000.
  • Página 84: Acceso Remoto

    All manuals and user guides at all-guides.com Acceso Remoto Esta sección explica dos tipos de acceso a control remoto: utilizando el auricular inalámbrico para tener acceso al sistema contestador, o tener acceso al sistema contestador desde otro teléfono. Usted puede tener acceso al sistema contestador en la base con los botones del auricular. Usted puede también tener acceso a su sistema contestador desde cualquier teléfono de tono al inscribir los 3 dígitos de su código de seguridad después de que usted escucha el anuncio saliente.
  • Página 85: Para Tener Acceso Al Sistema Contestador Desde Otra Localización

    All manuals and user guides at all-guides.com Para Tener Acceso al Sistema Contestador desde Otra Localización Usted puede tener acceso a su sistema contestador desde cualquier teléfono de tono inscribiendo su código de 3 dígitos después de que usted escuche el anuncio saliente. 1.
  • Página 86: Instalar La Batería Del Auricular

    All manuals and user guides at all-guides.com Instalar la Batería del Auricular PRECAUCION: Para reducir el riesgo de fuego o lastimaduras personales, use solamente la batería de Ni’quel-Cadmio (Ni-Cd) modelo 5-25 aprobado por Thomson Inc. eso es compatible con esta unidad. 1.
  • Página 87: Operación De Los Audífonos Y Gancho Del Cinturón

    All manuals and user guides at all-guides.com Operación de los Audífonos y Gancho del Cinturón Para Conectar unos Audífonos Opcionales al Auricular Para poder tener una conversación con las manos libres, conecte los audífonos (no incluidos) al enchufe marcado HEADSET como se muestra. El recibidor y el micrófono se desactivan cuando los audífonos se conectan.
  • Página 88 All manuals and user guides at all-guides.com ENLACE AURICULAR?/ Indicación preguntándole si hay la necesidad de volver a registrar el ENLACE BASE? auricular inalámbrico con la base o asignar un nuevo código para el sistema en caso de pérdida del enlace. BLOCKED NUMBER La persona está...
  • Página 89: Señales Sonoras Del Auricular

    All manuals and user guides at all-guides.com Señales Sonoras del Auricular Señal Significado Un tono de gorgeo largo (con timbre encendido) Señala que una llamada está entrando Tres tonos cortos Señal del localizador Un “bip” corto (cada 7 segundos) Advertencia de baja batería Solución de Problemas Soluciones para el Teléfono No hay tono de marcar...
  • Página 90: Soluciones Para El Identificador Del Llamadas

    All manuals and user guides at all-guides.com Usted experimenta estática, ruido, o debilitamiento del sonido entrante o saliente • Cambie canales. • El auricular inalámbrico puede estar fuera de rango con la base. Acérquelo a la base. • Acerque el auricular a la base (el auricular puede estar fuera de rango). •...
  • Página 91: Soluciones Para La Batería

    All manuals and user guides at all-guides.com Error en el Mensaje del Caller ID • El aparato muestra este mensaje si detecta cualquier cosa que no sea información válida del Caller ID durante el periodo de silencio después del primer timbre. Este mensaje indica la presencia de ruido en la línea.
  • Página 92: Cuidado General Del Producto

    All manuals and user guides at all-guides.com Cuidado General del Producto Para mantener su aparato funcionando decuadamente y en buenas condiciones, siga las siguientes pautas: • Evite poner el teléfono cerca de calentadores (calefactores) de ambiente y dispositivos que generen interferencia eléctrica ejemplo, motores o lámparas fluorescentes). •...
  • Página 93 All manuals and user guides at all-guides.com Índice Información de Interferencias 3 Información Sobre la Aprobación de Equipo 2 Acceso Remoto 36 Instalación 7 Almacenar Archivos del Identificador de Llamadas (en la Memoria de CID 32 Instalar la Batería del Auricular 38 Almacenar Archivos del Identificador de Instrucciones Orales 11 Llamadas en la Memoria Interna 33...
  • Página 94 All manuals and user guides at all-guides.com Para Borrar Mensajes 14 Para Utilizar el Interfono con una Llamada Telefónica 27 Para Borrar Todos los Archivos del Identificador de Llamadas 35 Pautas Importantes de la Instalación 7 Para Cambiar el Código de Seguridad 37 Precauciones de Seguridad para la Batería 38 Para Conectar el Auricular Alámbrico 10 Programación del Sistema Contestador 11...
  • Página 95: Garantía Limitada

    All manuals and user guides at all-guides.com Garantía Limitada Lo que cubre su garantía: • Defectos de materiales o de trabajo. Por cuánto tiempo después de la compra: • Un año, a partir de la fecha de compra. (El periodo de garantía para unidades arrendadas se inicia con la primera renta o 45 días de la fecha del embarque a la firma de arrendamiento, lo que ocurra primero).
  • Página 96: Información De Accesorios

    área individuales a las cuales se envíe la mercancía. Los artículos están sujetos a disponibilidad. Thomson Inc. 10330 North Meridian St. Modelo 25881 Indianapolis, IN 46290‑1024 00008104 (Rev. 1 DOM E/S) © 2006 Thomson Inc. 06‑20 Trademark(s) ®...

Tabla de contenido