Attery; Caller Id Solutions - GE 25881 Guia Del Usuario

• You may have too many extension phones on your line. Try unplugging some
phones.
• Check for dial tone. If no dial tone is heard, see No dial tone above.
You experience static, noise, or fading in and out
• Change channels.
• The cordless handset may be out of range of the base. Move closer to the base.
• Move closer to base (cordless handset might be out of range).
• Make sure base is not plugged into an outlet with another household appliance.
• Charge the battery.
Unit beeps
• Place the handset in the cradle for 0 seconds. If it still beeps, charge battery for
hours.
16
• Clean charging contacts on cordless handset and charge cradle with a soft cloth,
remove comma or an eraser.
• See solutions for "No dial tone" on previous page.
• Replace the battery.
Memory Dialing doesn't work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless handset
• Unplug the AC power adaptor from the wall outlet and the back of the base.
Remove the handset battery. Wait for 30 seconds and plug the power adaptor
back into the base and wall outlet. Reconnect the battery and charge for 16 hours.

Caller ID Solutions

No Display
• Is battery fully charged? Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet.
Disconnect the AC power adaptor from the base and reconnect it.
4
All manuals and user guides at all-guides.com