Bluetooth - Mobile Phone; Receive A Call - JVC KD-X472DBT Manual De Instrucciones

Bluetooth®
(for KD-X472DBT/KD-X272DBT)
Bluetooth — Mobile phone

Receive a call

When there is an incoming call:
• KD-X472DBT: The buttons will blink in the color you have selected in
[RING COLOR]. (Page 18)
• KD-X272DBT: The buttons will blink in the blinking pattern you have
selected in [RING ILLUMI]. (Page 18)
• The unit answers the call automatically if [AUTO ANSWER] is set to a selected
time. (Page 18)
During a call:
• KD-X472DBT: The buttons stop blinking and illuminate in the color you
have selected in [RING COLOR]. (Page 18)
• KD-X272DBT: The buttons stop blinking.
• If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
The following operations may differ or be unavailable depending on the
connected phone.
To On the faceplate
First incoming call...
Answer a call
Press
Reject a call Press and hold
End a call
Press and hold
or the volume knob.
or the volume knob.
or the volume knob.
To
While talking on the first incoming call...
Answer another incoming
call and hold the current
call
Reject another incoming
call
While having two active calls...
End current call and
activate held call
Swap between the current
call and held call
Adjust the phone volume*1
[00] to [35] (Default: [15])
Switch between hands-free
and private talk modes*2
*1 This adjustment will not affect the volume of the other sources.
*2 Operations may vary according to the connected Bluetooth device.
Improve the voice quality
While talking on the phone...
1 Press and hold .
2 Turn the volume knob to select an item (page 18), then press the
knob.
3 Repeat step 2 until the desired item is selected or activated.
4
Press to exit.
To return to the previous setting item, press
On the faceplate
Press or the volume knob.
Press and hold or the volume
knob.
Press and hold or the volume
knob.
Press .
Turn the volume knob during a call.
Press during a call.
.
ENGLISH
17