ENGLISH
POSSIBLE LIMITATIONS USE
-
- This device may operate on unauthorized frequencies in the region where the user is located. We recommend that you con-
tact the competent authorities and request the necessary information relating to the frequencies authorized in your region for
wireless microphone systems. In some cases, a ministerial license may be required for the use of this appliance. For possible
requirements, contact the competent authorities. The user assumes exclusive responsibility for the acquisition of the license
for radio-microphones and licensability depends on the classification and application of the user and on the frequency selected.
(Legislative Decree 269/2001 art.6 paragraph 3). The frequencies used by this product are authorized only on Italian territory
and may not be usable in other countries. It is recommended to contact the competent authorities and request the relevant
information.
European countries which product has restrictions:
Regno Unito: IMPLEMENTED.
Spagna: LIMITED IMPLEMENTATION.
Francia: LIMITED IMPLEMENTATION, for professional users.
Danimarca: LIMITED IMPLEMENTATION, tuning range.
UK
ES
FR
Malta: LIMITED IMPLEMENTATION, individual license required
Irlanda: NOT IMPLEMENTED
DK
MT
IE
VOICE RECORDING
This unit and 'capable of recording the vocals on the USB memory or SD card when using the supplied microphone. The device
will automatically create a folder called "Record" inside the USB memory and it will store all log files.
1. Switch on the unit;
2. Insert a USB memory or a SD Card into the socket;
3. Select the USB/SD functon by MODE button (4) on the unit, or the MODE button (36) on the remote control;
4. Press REC button (27) on remote control to start recording, the display will show "REC" and the time signature will start;
5. Press again REC button to stop recording. The unit will play, automatically, the recorded file.
Note:
-
You can record only the voice.
-
When the "Recording" function is activated, some appliance controls are inhibited, they will resume their normal function
when the recording is stopped.
TROUBLESHOOTING
If a problem occurs, follow the steps in the table below.
If the problem still can't be solved, please contact your retailer.
Problem
No sound when power is
turned ON
Distorted sound
No sound from the mi-
crophone
No sound comes after
inserting USB/SD Card
Charging indication-red
light flashing when there is
low charge
Possible cause
1. No input sound source comes
2. Volume knob in the lowest position
3. Voice switch off
4. USB/SD card not plugged
1. Volume is too loud
2. Audio file error
1. Microphone socket may not be plugged
properly.
2. Microphone switch may not be on.
3. Microphone volume is on lowest mode.
1. Incorrect file format
2. USB/SD may not be plugged properly
Charging adapter is not inserted properly.
1. Input AUX signal
2. Adjust volume
3. Turn on voice switch
4. Plug USB/SD card,play MP3
1. Turn the volume down
2. Check and change the audio file
1. Ensure the microphone is correctly plugged
into the socket.
2. Turn on the microphone
3. Adjust the microphone volume as per users
wish
1. File format should be MP3
2. Plug USB/SD card correctly
It will not affect the speaker system. The light
is only used for indicating whether the unit is
charging
15
XF 3500 PRO
Solution