Orbegozo CTP 1820 Manual De Instrucciones página 11

CTP 1820
4. To uninstall, handing the hair clipper in obverse, then pull the blade slightly out of the body for uninstall.
See picture
5. To install, please aim the blade at slot for install, then press the full parts entad until hearing the "KA"
sound. See picture
HOW TO CHARGE THE DEVICE
1. Place the switch on the main unit in position "O" (off).
2. Plug it in.
3. The lighted indicator will turn red when it is plugged in.
4. The battery will be completely charged after 8 hours of charging, and the full charge lighted indicator will
turn on.
5. Once the battery is charged, unplug the main unit.
6. Place the switch in position "I" (on) to use the device.
7. Place the switch in position "O" (off) after cutting your hair.
WITH THE CABLE UNIT
1. Place the switch in position "O" (off).
2. Plug the main unit's plug into the outlet.
3. Once connected, the lighted indicator will turn red.
4. Place the switch in position "I" (on) to use the machine, then the lighted indicator will turn off.
5. Place the switch in position "O" (off) after cutting your hair, and then unplug the unit's cable from the
plug.
11