Drilling The Piping, Condensation Hose And Cable Feed-Through - Qlima S42 Serie Manual De Instalación

S(C)5232/S(C)4232
Indoor unit outline
pipe hole
65mm
102mm
S(C)5248/S(C)4248
7.2

Drilling the piping, condensation hose and cable feed-through.

a. Determine the positions of the holes according to the diagram detailed in Fig. 9. Drill one (1) hole (≥
85 mm for SC42xx & SC52xx / ≥ 65 mm for S42xx & S52xx(B) & SJA2519) slanting slightly downwards
to outdoor side, this will prevent water to come indoors (fig 10).
b. Always use wall hole conduit when drilling metal grid, metal plate or the like.
452.7mm
406.4mm
805mm
249mm
pipe hole
65mm
153mm
4
73 73