Description Of The Control Panel; Auto Mode - Qlima P926 Instrucciones De Uso

Slide Panel Band B into Panel A and size to widow width. Windows sizes
vary. When sizing the window width, be sure that the window kit assembly is
free from gaps from gaps and/or air pockets when taking measurements.
D

DESCRIPTION OF THE CONTROL PANEL

Check up whether the exhaust hose has been mounted properly.
1 Cautions for cooling and dehumidifying operations:
- When using functions on cooling and dehumidifying, keep an interval of
at least 3 minutes between each ON/OFF.
- Power supply meets the requirements.
- The socket is for AC use.
- Do not share one socket with other appliances.
- Power supply is AC220--240V, 50Hz

AUTO MODE

2
- According to the current room temperature ,automatically select the
mode: cooling, dehumidifying or fan (see table 1).
Room Temperature
(Tr)
Mode
Set Temperature
3 Cooling operation
- Press the "Mode" button till the "Cool" icon appears.
- Press the " DOWN "or" UP "button to select a desired room temperature.
(16ºC-31ºC)
- Press the " WIND " button to select wind speed.
4 Dehumidifying operation
Press the "Mode" button till the "Dehumidify" icon appears .
- Automatically set the selected temperature to current room temperature
minus 2ºC. (16ºC-31ºC)
- Automatically set the fan motor to LOW wind speed.
5 Fan operation
- Press the "Mode" button till the "Fan" icon appears.
- Press the " WIND " button to select wind speed.
6 Heating operation (this function is not available for a cold-single unit)
- Press the "Mode" button till the "Heat" icon appears.
- Press the " DOWN "or" UP " button to select a desired room temperature.
(16ºC-31ºC)
- Press the " WIND " button to select wind speed.
ºC ºC
Tr<23 23 ≤Tr <26
Heating Dehumidify
ºC ºC
21 23
ºC ºC
Tr ≥26
Cooling
ºC
25
Table 1.
4
63