General Safety Rules; Work Area - Surtek AR436 Manual De Usuario

GENERAL SAFETY RULES

Your PRODUCT's NAME has many features that
will make your job faster and easier. Safety,
performance and reliability have been given
top priority in the design of this tool, qualities
to make easy to maintain and to operate.
WARNING: Read and understand all in-
structions. Failure to follow all indications list-
ed below, may result in electric shock, fire and/
or serious personal injury.
SAVE THESE INSTRUCTIONS.
GENERAL SAFETY RULES
• It is important to read and understand your
instruction manual and any label attached to
the power tool. Learn its application as well as
it's limitations and the potential hazards asso-
ciated with this power tool.
• Do not overreach. Keep proper footing and
balance everytime. Proper footing and balance
enables better control of the tools in unexpect-
ed situations.
• Use safety equipment. Always wear eye pro-
tection. Dust mask, nonskid safety shoes, hel-
met, or hearing protection must be used for
appropriate conditions.

WORK AREA

• Keep your work area clean and well lit. Clut-
tered benches and dark areas may cause acci-
dents.
• Do not use power tools in damp, wet condi-
tions, or expose them to the rain.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.
TOOL USE AND CARE
• Do not force tool. Use the tool correctly on
its application this will help you to do the job
better and safer.
E N G L I S H •
• Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
• Check for misalignment or obstructed mov-
ing parts, breakage parts, and any other condi-
tion that may affect the tools operation. If you
find a damaged tool, take it to the authorized
service center before using it. Many accidents
are caused by poorly maintained tools.
• Use only accessories that are recommended
by the manufacturer for your model. Suitable
accessories for one tool, may become hazard-
ous when are used on another tool.
• Do not alter or misuse tool. These tools have
been built by precision. Any alteration or mod-
ification not specified is misuse and may result
in a dangerous condition.
TOOL SERVICE
• Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
CHECK DAMAGED PARTS
If any part of the power tool is damaged, be-
fore further use, check carefully that it will
operate properly and perform its intended op-
eration. Check alignment of moving parts for
binding. Any guard or other part that is dam-
aged should be correctly repaired or replaced.
FEATURES
1. Tool holder.
2. LED light.
3. Battery indicator.
4. Soft grip.
5. On/Off switch.
6. Rotational direction
switch.
OPERATION INSTRUCTIONS
For your safety
• Allow a heated up power tool to cool down
before charging.
• Danger of explosion: Protect the power tool
from heat and fire. Do not place the power
tool on radiators or expose it to heavy sun
U se r ' s m an ua l
6
1
5
2
3
4
5