Sunny SF-RB4708 Manual Del Usuario página 13

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669) .
Fig. A
STEP 5:
Attach the 2 Handlebars (No. 5L/R) to the 2
Swing Tubes (No. 3L/R) with 4 Square
Bolts (No. 58), 4 Arc Washers (No. 59) and
4 Ball Cap Nuts (No. 11) using Spanner
(No. 103). Connect the 2 Pulse Wires (No.
60) with 2 Extension Wires 1 (No. 49).
Lift up the Computer Tube (No. 13). Position
the Sleeve (No. 71) in between the holes of
Fixed Bracket (No. 63). Thread Hex Screw
(No. 64) from the side of the Fixed Bracket
(No. 63), through Sleeve (No. 71), to the
other side of the Fixed Bracket (No. 63) and
tighten with Allen Wrench (No. 105). See
Fig. A.
Connect the 2 Extension Wires 2 (No. 65),
Sensor Wire (No. 66) with the wires of the
Computer (No. 31). Remove 4 Cross Pan
Head Screws (No. 38) from the back of the
Computer (No. 31).
Attach the Computer (No. 31) to the
Computer Tube (No. 13) with 4 Cross Pan
Head Screws (No. 38) using Spanner (No.
103).
Assembly is now complete!
12