Safety In The Workplace; Personal Safety - Expondo Royal Catering RCIK-3500CG Manual Del Usuario

Tabla de contenido

Publicidad

cord should be replaced by a qualified electrician or
the manufacturer 's service centre.
h)
To avoid electric shock, do not immerse the cord,
plug or device in water or other liquids. Do not use
the device on wet surfaces.

2.2. SAFETY IN THE WORKPLACE

a)
Make sure the workplace is clean and well lit. A
messy or poorly lit workplace may lead to accidents.
Try to think ahead, observe what is going on and use
common sense when working with the device.
b)
Do not use the device in a potentially explosive
environment, for example in the presence of
flammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c)
If you discover damage or irregular operation,
immediately switch the device off and report it to a
supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
In case of fire, use a powder or carbon dioxide
(CO
) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
g)
Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device)
h)
Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
i)
Keep packaging elements and small assembly parts
in a place not available to children.
j)
Keep the device away from children and animals.
REMEMBER! When using the device, protect
children and other bystanders.

2.3. PERSONAL SAFETY

a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience
and/or knowledge unless they are supervised by
a person responsible for their safety or they have
received instruction on how to operate the device.
c)
Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
d)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
b)
Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces
the risk of accidental activation.
8
c)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
d)
Keep the device in perfect technical condition. If
damage is discovered, hand over the device for
repair before use.
e)
Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
g)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
h)
Do not move, adjust or rotate the device in the
course of work.
i)
Do not leave this appliance unattended while it is in
use.
j)
Clean the device regularly to prevent stubborn grime
from accumulating.
k)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
l)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
m)
Note! If you notice scratches or cracks on the
glass hob, stop using the device immediately and
disconnect it from the power source.
n)
Keep aluminium foil and plastic dishes away from the
hob.
o)
Do not store objects on the surface of the device.
p)
Dimensions of the cookware placed on the hob
should be in the range of Ø12 - Ø26 cm.
q)
The weight of the dish with the contents placed on
the hob should not exceed 30-40 kg.
r)
Do not place metal cookware, cutlery, etc. near the
hob, as they may get hot and cause skin burns.
s)
NOTE! rings, watches, chains etc. and other metal
objects may get hot in the vicinity of the device
which has been switched on.
t)
Do not heat empty cookware on the hob.
u)
The device should be used on a heat-resistant
surface.
v)
NOTE! The hob remains hot for a long time after the
power is turned off. Touching a hot hob will cause
burns to the skin.
w)
Do not use the cooker in the vicinity of devices
susceptible to electromagnetic radiation.
x)
Only use cookware designed for use with induction
cookers.
y)
Do not place the device on metal surfaces.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The device is designed for heating and cooking dishes
and liquids in cookware intended for use with induction
cookers. The product is intended for commercial use.
The user is liable for any damage resulting from
unintended use of the device.
14.06.2019
3.1. DEVICE DESCRIPTION
RCIK-3500CG
RCIK-3500GP
1
2
2
RCIK-3500CGP
RCIK-3500CGW
1
2
2
1. hob
2. control panel
DESCRIPTION OF CONTROL PANELS
RCIK-3500CG
B
E
F
A
C
K
G
D
J
I
H
A.
display
B.
LED: heating power setting mode
C.
LED: heating temperature setting mode
D.
LED: timer setting mode
E.
button - heating power setting
F.
LED: the device is on
G.
ON/OFF button
H.
temperature setting button
I.
value increase button
J.
value reduction button
K.
timer setting button
RCIK-3500GP
G
B
C
D
E
F
A
A.
display
B.
value increase button
C.
value reduction button
D.
settings lock button
E.
timer setting button
F.
temperature / heating power setting button
G.
LED: the device is on
H.
ON/OFF button
14.06.2019
RCIK-3500CGP, RCIK-3500CGW
B
E
1
A
C
G
D
J
I
H
A.
display
B.
LED: heating power setting mode
C.
LED: heating temperature setting mode
D.
LED: timer setting mode
1
E.
timer setting button
F.
LED: the device is on
G.
ON/OFF button
H.
temperature / heating power setting button
I.
value increase button
J.
value reduction button
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 10 cm distance
between each side of the device and the wall or other
objects. The device should always be used when positioned
on an even, stable, clean, fireproof and dry surface, and
be out of the reach of children and persons with limited
mental and sensory functions. Position the device such that
you always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label!
3.3. DEVICE USE
HOW TO USE
1)
Place a filled pot, etc. centrally on the hob.
2)
Connect the device to a power source and switch it
on by pressing the ON/OFF button. The LED above
the button lights up.
3)
Set the temperature, heating power and, if necessary,
the timer according to the following instructions for
each model:
RCIK-3500CG
• Press the button (E) to set the heating power. The
H
LED (B) lights up. Set the value using the buttons
(I) and (J).
• Press the button (H) to set the heating
temperature. The LED (C) lights up. Set the value
using the buttons (I) and (J).
• Press the button (K) to set the timer. The LED (D)
lights up. Set the time using the buttons (I) and
(J).
RCIK-3500GP
• Press the button (F) to set the heating power or
temperature. Switch between the parameters
using single button (F) presses. Set the values
using the buttons (B) and (C).
• Press the button (E) to set the timer. Set the time
value using the buttons (B) and (C).
• Press the button (D) to lock the control panel.
A key symbol appears on the display. To unlock
F
9

Publicidad

Tabla de contenido
loading

Tabla de contenido