Intended Use; Safety Information; Disposal Information - Siemens VS07 Serie Instrucciones De Uso

Ocultar thumbs Ver también para VS07 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Please keep this instruction manual.
When passing the vacuum cleaner on to
a third party, please also pass on this
instruction manual.

Intended use

This vacuum cleaner is intended for
domestic use only, not for commercial
use.
This vacuum cleaner should only be
used in accordance with the instructions
in this manual.
The manufacturer will not accept any
responsibility for damage caused by
improper use or incorrect operation.
Therefore, please note the following
points.
The vacuum cleaner must only be
operated with:
Original dust bags
MEGAfilt
SuperTEX
®
Manufacturer's replacement parts,
accessories and optional accessories
The vacuum cleaner is not to be used
for:
Vacuuming persons or animals
Vacuuming up:
– Insects and spiders
– Hazardous, sharp-edged, hot or
burning substances.
– Damp or liquid substances.
– Highly flammable or explosive
substances and gases.
18
All manuals and user guides at all-guides.com
en

Safety information

This vacuum cleaner complies with the
recognised rules of technology and the
relevant safety regulations.
We confirm compliance with the
following European directives:
89/336/EEC (amended by Directives
91/263/EEC, 92/31/EEC and
93/68/EEC). 73/23/EEC (amended by
Directive 93/68/EEC).
Only connect to a power supply and
operate the vacuum cleaner in
accordance with the rating plate.
Never use the vacuum cleaner without
the MEGAfilt
SuperTEX dust bag.
®
=> This can damage the vacuum
cleaner!
Only allow children to use the vacuum
cleaner under supervision.
Keep suction away from your face
when using the handle, nozzles or
pipe.
=> Risk of injury!
Do not carry/transport the vacuum
cleaner by the power cord.
Remove the power cord completely
from the power supply after using the
vacuum cleaner continuously for
several hours.
When disconnecting the appliance
from the mains, pull the plug, not the
power cord.
Do not pull the power cord around
sharp corners or allow it to become
trapped.
Unplug the power cord from the mains
before carrying out any work on the
vacuum cleaner or its accessories.
Do not use the vacuum cleaner if it is
damaged. Unplug the power cord
from the mains if a fault is detected.
Only authorised after-sales service
personnel are permitted to carry out
repairs and fit replacement parts on
the vacuum cleaner.
The vacuum cleaner should be
protected from external weather
conditions, moisture and sources of
heat.
Do not vacuum any drill dust or
building rubble
=> this can damage the vacuum
cleaner.
Switch off the vacuum cleaner when it
is not in use.
At the end of its life, the vacuum
cleaner should be disposed of in an
appropriate manner.
For safety reasons, vacuum
cleaners with an output of 2,000 watts
or more are fitted with a temperature
safety switch, which automatically
switches the vacuum cleaner off if it is
blocked and overheating. Unplug the
power cord from the mains and make
sure that the nozzle, tube and hose
are not blocked. Also check whether
the dust bag needs changing.
Having cleared the blockage, leave
the vacuum cleaner to cool down for
at least one hour. It can then be
switched back on again.
en

Disposal information

Packaging
The packaging is designed to protect
the vacuum cleaner from being
damaged during transportation.
It is made of environment-friendly
materials and can be recycled.
Dispose of unneeded packaging at
the appropriate recycling points.
Used vacuum cleaners
Old appliances still contain many
recyclable materials.
Therefore, please take used
appliances to your retailer or recycling
centre so that they can be recycled.
For current disposal methods, please
enquire at your appliance dealership
or local council.
!
Please note
The mains socket must be protected
by a 16A fuse.
If a fuse should blow when you switch
on the vacuum cleaner, this may be
because other electrical appliances
which have a high current draw are
connected to the same power circuit.
To prevent the fuse from tripping,
select the lowest power setting before
switching the vacuum cleaner on, and
increase the power only once it is
running.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido