Remote Control (Optional) - Centrometal CentroPelet ZS Serie Manual Del Usuario

• After some minutes the display will show the words "WORK" alternating room temperature and current working power.
The stove is now completely on.
• When the stove reaches the set temperature, the display will show: "MODULATION" .
WARNING!
!
Before lighting a small amount of smoke may fill the com-
bustion chamber.
3.2 Stove switching off
To switch off the stove, press the key
stove has been switched off, the fan continues working for a set time in order to grant a fast smokes exhaust from the combustion
chamber.
If you have a model with remote control, you just need to switch the remote control off keeping the key
2 seconds and confirming the selection pressing the key SEND.
If you try to switch on the stove during this phase, the display will show "ATTESA RAFFRED" (that means wait for cooling)
in order to inform you a switching off phase is running. Wait until the cooling phase is completely off and the display shows
"OFF " before staring a new light up.

4.0. Remote control (optional)

Keys and main functions
The remote control can be used to check the stove. The re-
mote control offers some functions which are not available
from the keyset, like the automatic programming of the
switching on and off of the uni
How to use the remote control:
1. Direct the remote control on the control board of the stove
2. Check there are no obstacles between the remote con-
trol and the receiver on the stove
3. Every function you set on the remote control must be
confirmed pressing the key SEND. After selecting the
wished function, an acoustic signal will confirm your
choice.
On/Off
This function is used to switch the stove and
the remote control on or off.
Keep the key pressed for at least two seconds
to switch the system on or off. Then press the
key SEND.
You can use the two keys to set the wished
temperature between a min. value of 7°C and
a max. value of 40°C.
28
All manuals and user guides at all-guides.com
on the control board until you read "CLEANING FINAL". on the display. After the
pressed for
AUTO
CANCEL