Remote Control - Centrometal SLIM 6 Manual Del Usuario

Remote control

Keys and main functions
The remote control can be
used to check the stove. The
remote control offers some
functions which are not
available from the keyset, like
the automatic programming
of the switching on and off
of the unit.
How to use the remote
control:
1. Direct the remote control
on the control board of the
stove
2. Check there are no
obstacles between
remote control and
receiver on the stove
3. Every function you set on
the remote control must be
confi rmed pressing the key
SEND. After selecting the
wished function, an acoustic
signal will confi rm
choice.
On/Off
This function is used to switch the stove and
the remote control on or off. Keep the key
pressed for at least two seconds to switch
the system on or off. Then press the key
SEND.
You can use the two keys to set the wished
temperature between a min. value of 7°C
and a max. value of 40°C.
Please join the following procedure to set
the functioning mode:
Automatic Functioning
power 1
power 2
power 3
power 4
power 5
SEND
Use this key to transmit the selected
information to the pcb.
ECONO
This key activates or deactivates the function
ECONO. Keep the key pressed for at least
two seconds to activate or deactivate this
function.
8
the
the
your
LCD 2
(on1)
(on2)
(on3)
(on4)
(on5)
TURBO
This key activates or deactivates the function
TURBO. Keep the key pressed for at least
two seconds to activate or deactivate this
function.
CLOCK FUNCTION
Please join the following procedure to set
the clock function on the remote control:
- press the symbol
- use the keys and
minutes.
- press again to confi rm and SEND to
transmit the function to the pcb.
ON1
Using this key you can set a single time
schedule for the automatic switching on of the
stove (program 1).
OFF1
Using this key you can set a single time
schedule for the automatic switching off of
the stove (program 1).
ON2
Using this key you can set a single time
schedule for the automatic switching on of
the stove (program 2).
OFF2
Using this key you can set a single time
schedule for the automatic switching off of
the stove (program 2).
AUTO
With this key you can decide to repeat the
programmed switching on and off (program
1 and 2) every day. The key AUTO activates
this function.
Keep the key pressed for at least two seconds
to activate or deactivate this function.
CANCEL
Use the key CANCEL in the event you want
to cancel some programmed switching on
or off of the stove.
and the time blinking.
to set hour and