Connecting External Equipment - Toshiba Regza AV50 Serie Manual Del Usuario

00GB_AV505D_EngOM.book Page 7 Saturday, November 24, 2007 5:53 PM

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
COMPONENT VIDEO INPUT (EXT3)
SCART 2 (EXT2)
SCART 1 (EXT1)
*a decoder could
be Digital Satellite or
any other compatible
decoder.
decoder*
media recorder
Aerial cables: - - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto tuning put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
The phono sockets alongside the VIDEO INPUT socket will
accept L and R audio signals.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD, decoder or electrical equipment with digital audio and
video output. It is designed for best performance with 1080i
high-definition video signals but will also accept and display
VGA, 480i, 480p, 576i, 576p and 720p signals.
HDMI™ INPUT
SOCKETS
VIDEO INPUT (EXT4)
MEDIA REC.
TV
IN/OUT SAT
NOTE: Although this television is able to connect to HDMI
equipment it is possible that some equipment may not operate
correctly.
A wide variety of external equipment can be connected
to the back of the television, therefore the relevant
owners manuals for all additional equipment must be
referred to.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
If connecting S-VIDEO equipment, set the INPUT for EXT2.
See page 31.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
HDMI1, HDMI2 or ATV.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
7
FIXING STRAP
CABLE HOLDER
The cable holder can
be used for aerial, media
recorder and audio cables.
Do not use as a handle and
remove all cables before
moving the television.
o
to select between DTV, EXT1, EXT2, EXT3, EXT4,
SETTING UP