Troubleshooting; Disposal - Silvercrest SRGP 1300 A1 Instrucciones De Uso

Troubleshooting

Error
The appli-
ance is not
working.
If the malfunction cannot be corrected using one of the suggestions above, or
if you have found some other kind of malfunction, please contact our Customer
Service department.

Disposal

Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please comply with all applicable regulations. Please contact your
waste disposal facility if you are in any
doubt.
Your local community or municipal authorities can provide information on how
to dispose of the worn-out product.
The packaging is made from environmentally friendly material and can be dis-
posed of at your local recycling plant.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal, if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard, 80–98: composites.
│ GB │ MT
■ 56
Cause
The plug is not connected to
the mains power.
The mains power socket is
defective.
The appliance is defective.
The overheat protection has
been triggered.
Solution
Insert the plug into a mains
power socket.
Use a different mains power
socket.
Contact the Customer Service
department.
Disconnect the plug from the
mains power socket and wait
until the appliance has cooled
down. If the appliance still does
not function after cooling down,
contact the
Customer Service department.
SRGP 1300 A1