Switching Ice Cube Production On And Off; Reset Water Filter Counter; Eco Mode; Self-Test - Thermador T30IB900SP Manual De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

en-us Operating the appliance
Switching Eco mode on or off
Press the " button to open the Settings menu.
1.
Use the > button to move to the menu item Eco
2.
mode.
Press the </= button.
3.
The temperature is changed, and the display shows
the new temperature.
Note: You can also switch Eco mode on or off by
adjusting the temperature with the +/- buttons.

Switching ice cube production on and off

9
CAUTION!
Damage to the appliance!
Never store bottles or food in the ice cube
container, even for short periods. This can
block and damage the ice maker.
Ice cube production starts as soon as the appliance
has reached the set temperature.
Note: Ice cube production stops automatically when
the ice cube container is full.
Switching ice maker on or off
Press " button to open the Settings menu.
1.
Use > button to move to the menu item Ice cube
2.
production.
Press </= button.
3.

Reset water filter counter

After replacing the water filter, you have to reset the
water filter counter.
Press " button to open the Settings menu.
1.
Press > button to move to the menu item Reset
2.
water filter counter.
Press 8 button to confirm, and confirm the query
3.
again with 8 button.
Note: The water filter counter will not be reset if you
abort the query or take longer than 10 seconds to
make an input.
Switching the water filter counter on and off
If you have replaced the water filter with a particle
filter, switch the water filter counter off. It is not
needed in this case as the particle filter does not
have to be replaced.
Press " button to open the Settings menu.
1.
Scroll to the left to the Appliance settings menu.
2.
Press 8 button.
3.
Press > button to move to the menu item Water
4.
filter counter.
To change the setting, press : button.
5.
16

Eco mode

Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
Refrigerator compartment: +43° F (6° C)
Freezer compartment: +3° F (–16° C)
Switching Eco mode on or off
Press the " button to open the Settings menu.
1.
Use > button to move to the menu item Eco
2.
mode.
Press </= button.
3.
The temperature is changed, and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with the +/- buttons.

Self-test

This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 26

Setting the brightness of the control panel

Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press : button to open the menu item
4.
Brightness.
Use < > buttons to set the required brightness.
5.
Press 8 button.
6.
The setting is saved.
Press ; button to exit the menu.
7.

Switching key press sound on or off

You can switch the sounds generated when pressing
keys off and back on again.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Press > button to move to the menu item Key
4.
press sound.
Press : button to open the menu item.
5.
Use < > buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Publicidad

Tabla de contenido
loading

Tabla de contenido