Switching Key Press Sound On Or Off; Setting The Key Volume; Setting The Signal Tone Volume; Automatic Clean Lock - Thermador T23IR900SP Manual De Uso Y Cuidado

en-us Operating the appliance

Switching key press sound on or off

You can switch the sounds generated when pressing
keys off and back on again.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Press > button to move to the menu item Key
4.
press sound.
Press : button to open the menu item.
5.
Use < > buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Setting the key volume

You can adjust the volume level of the sounds
generated when pressing keys.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Press > button to move to the menu item Key
4.
volume.
Press : button to open the menu item.
5.
Use < > buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Setting the signal tone volume

You can adjust the volume level of the signal tones
generated e.g. with alarms.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button to open the menu item.
3.
Use > button to move to the menu item Signal
4.
tone volume.
Press : button to open the menu item.
5.
Use < > buttons to select the required setting.
6.
Press 8 button.
7.
The setting is saved.
Press ; button to exit the menu.
8.

Automatic clean lock

You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press > button to move to the menu item
4.
Automatic clean lock.
To change the setting, press : button.
5.
14
All manuals and user guides at all-guides.com

Automatic door opening

9
The automatic door opening function supports you in
opening the door. As soon as you activate this
function, automatic door opening moves out and
supports you in opening the door.
Open the menu item Aut. door opening:
1.
2.
3.
4.
5.
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
1.
2.
3.
4.
5.
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
1.
2.
3.
4.
Switching off automatic door opening
1.
2.
3.
CAUTION!
Repeatedly closing the door too early will cause
automatic door opening to fail or wear out.
Do not close the door as long as automatic
door opening is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door opening
will re-adjust itself.
Press " button.
Press < button to move to the menu item
Appliance settings.
Press 8 button to open the menu item.
Use > button to move to the menu item Aut. door
opening.
To change the setting, press : button.
Open menu item Aut. door opening.
Select menu item Push-to-open system.
Press 8 button to open the menu item.
Select menu item Opening force. Here you can
select the level of force required to activate
automatic door opening.
Select menu item Opening duration. Here you
can select how long the door should remain open
a crack before it closes again automatically.
If the door only remains open a crack, the
Note:
appliance checks once a second whether the door
is still ajar. After the selected opening time elapses,
the appliance will close the door automatically.
Open menu item Aut. door opening.
Select menu item Pull-to-open system.
Press 8 button to open the menu item.
Select menu item Opening force. Here you can
select the level of force required to activate
automatic door opening.
Open menu item Aut. door opening.
Select menu item Off.
Press 8 button.
The setting is saved.