Publicidad
Idiomas disponibles
Idiomas disponibles
Performing the initial start-up
1.
Position you Mio in your vehicle according to the installation instructions at the front of the
manual.
2.
For the initial start-up, slide the power switch to the ON position. Your Mio turns on.
Moov 200-Series
Note: The battery may not be fully charged when you use your Mio for the first time. To charge the battery,
refer to the User Manual.
3.
The warning screen appears. Tap Accept.
4.
The map screen will display.
The Main Menu can be accessed from the map screens
by tapping
bottom of any screen.
Note: The Main Menu screen may differ from above, depending on your Mio model.
Note: For normal operation, turn off your Mio by sliding the power switch to the OFF position. Your Mio enters a
suspended state. To use it again, slide the power switch to the ON position. Your Mio will be back to where you
left off.
or by tapping the status bar at the
Moov 300-Series
5
Publicidad
