Technical Characteristics; Important Safety Warnings - Fagor VP-30C Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
All manuals and user guides at all-guides.com
interior
19/1/06
16:53

1. TECHNICAL CHARACTERISTICS

Voltage/Frequency:
Power:
These appliances comply with the directives
from the European Electromagnetic
Compatibility Directive 89/336/CEE.

2. IMPORTANT SAFETY WARNINGS

• Before using this appliance for the first
time, read this instruction manual
carefully and keep it to refer to later.
• This appliance must be connected to an
earth installation.
• This appliance must not be used inside
bathrooms or showers or in damp
spaces. Do not use it in areas with
temperatures which exceed 40ºC.
• Before using the appliance, check that
the domestic network voltage
corresponds to what is indicated on the
appliance.
• After removing the packaging, check that
the appliance is in perfect condition; if in
doubt, consult the closest Technical
Assistance Service.
• This appliance must only be used
domestically. DO not use it outside.
• In the event of a fault and/or poor
operation of the appliance, switch it off
and do not try to fix it. In the event of
requiring repairs, only go to a Technical
Assistance Service authorised by the
manufacturer and request that original
parts are used.
• The user must not replace the cable. If it
is broken or it has to be substituted, only
go to the Technical Assistance Service
authorised by the manufacturer.
• The manufacturer will not be responsible
for damage which caused by
inappropriate or incorrect use or as a
result of repairs carried out by
unqualified personnel.
• Do not use the appliance if the cable or
the plug is damaged.
• Do not pull the cable to extract the plug
from the socket.
Página 6
EN
• Unplug the appliance when it is not being
used or when you are going to perform a
cleaning or maintenance task.
• Keep the appliance out of reach of
220V-240V~50Hz
45W
children or disabled people.
• Do not insert any objects through the
protection bars.
• Do not hang clothes on the fan
protection grille.
• Do not leave the fan next to a heat
source or on hot surfaces.
1.
Motor frame
2. Control panel / remote control
2.1. Stop button
2.2. Start/speed button
2.3. MODE button
2.4. Swing button
2.5. Timer button
3. Positioning plugs
4. Rear grille
5. Bolt for grille
6. Blades
7. Bolt for blade
8. Front grille
9. Hanging groove
10. Wall bracket
11. Control bracket
Before assembly, take the different parts of
the fan out of their packaging and check that
the power cable is whole and that the
appliance has not been damaged during
transport. Do not switch the appliance on if it
is damaged.
Fan assembly (Fig. 2)
1. Loosen the bolts (5 and 7) one of which
is threaded on to the motor shaft (anti-
clockwise) and the other on to the engine
frame (clockwise) respectively.
2. Assemble the rear grille (4) on the motor
frame (1) and fix it with the grille nut (5)
guiding it into the positioning plugs (3).
3. Insert the blades (6) on to the motor
shaft, fixing them with the nut (7).
7
3. APPLIANCE PARTS (FIG. 1)
4. ASSEMBLY INSTRUCTIONS

Publicidad

Tabla de contenido
loading

Tabla de contenido