Saeco Xelsis Serie Manual Del Usuario página 16

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 138
14
English
Item
Milk system/internal
cappuccinatore
Milk container
HygieSteam
container (milk tube
holder)
Pre-ground coffee
compartment
Coffee grounds
container
Drip tray
Lubrication of the
brew group
Water tank
Machine front
When to clean
After every day of use
Weekly
Monthly
Weekly
Weekly or when the machine
reminds you
Check the pre-ground coffee
compartment weekly to see if it
is clogged
Empty the coffee grounds
container when prompted by
the machine. Clean it weekly
Empty the drip tray daily or as
soon as the red 'drip tray full'
indicator pops up through the
drip tray (Fig. 29). Clean the drip
tray weekly
Every 2 months
Weekly
Weekly
How to find in the control panel/
What to do
STATUS -> HYGIESTEAM. Follow the steps
of the self-cleaning process to clean the milk
system. Wipe the outside of the metal milk
tube with a damp cloth before placing it into
the milk tube holder.
Remove and disassemble the internal
cappuccinatore. Rinse all parts under the tap
with some washing-up liquid.
STATUS -> HYGIESTEAM -> DEEP MILK
CLEAN. Follow the steps of the self-cleaning
process to clean the milk system.
Disassemble the milk container (Fig. 24) and
push out the ball using the pin of the milk
tube (Fig. 25). Clean all parts of the milk
container under the tap or in the
dishwasher.
Remove the HygieSteam container from the
machine (Fig. 26) and remove the
HygieSteam cover (Fig. 27). Clean the
HygieSteam container and cover under the
tap.
Unplug the machine and remove the brew
group. Open the lid of the pre-ground coffee
compartment and insert the spoon handle
into it. Move the handle up and down until
the clogged ground coffee falls down (Fig.
28). Go to www.saeco.com/care for detailed
video instructions.
Remove the coffee grounds container while
the machine is switched on. Rinse it under
the tap with some washing-up liquid.
Remove the drip tray (Fig. 30) and rinse it
under the tap with some washing-up liquid.
Lubricate the brew group with the by-
packed grease (see 'Lubricating the brew
group'). Go to www.saeco.com/care for
detailed video instructions.
Rinse the water tank under the tap.
Clean with a non-abrasive cloth.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido