Troubleshooting Guide - Craftsman CMCF800 Manual De Instrucciones

For assistance with your product, visit our website at www.craftsman.com for a list of service centers, or call CRAFTSMAN
at 1‑888‑331‑4569.
PROBlEM
Unit will not start.
Battery pack will not charge.
Unit shuts off abruptly.

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
POssiBlE CAUsE
Battery pack not installed properly.
Battery pack not charged.
Internal components too hot.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or
too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shutoff abruptly
when the charge is depleted.)
sOlUTiOn
Check battery pack installation.
Check battery pack charging requirements.
Allow tool to cool down.
Insert battery pack into charger until LED illuminates.
Plug charger into a working outlet. Refer to Important
Charging Notes for more details.
Move battery pack to a surrounding air temperature of above
40 °F (4.5 °C) or below 104 °F (+40 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.
English
11