Kohler STERLING 33197 Guia De Instalacion página 5

Sink
Channel Mounting
Fastener
3. Install the Sink
Temporarily position the sink in the countertop opening. Verify
the fit and position. Make any needed adjustments.
Carefully remove the sink from the countertop opening. Place the
sink upside down onto the carton.
Install the strainer to the sink according to the manufacturer's
instructions.
Clean the countertop.
Carefully position the sink into the countertop opening.
4. Secure the Sink to the Countertop
Place the aluminum lug onto the channel hook of the sink.
Place the cap against the underside of the sink and tighten the
screw until there is a tight fit between the sink and the
countertop.
Apply a continuous bead of quality sealant to the edge of the
sink rim to create a seal between the sink and the countertop.
Immediately wipe away any excess sealant, and fill any voids as
needed.
Sterling
All manuals and user guides at all-guides.com
Channel
Hook
Sealant
Cap
Aluminum
Lug
Countertop
5 1025457-2-D