Using The Aux Source; Using The Telephone Muting/Attenuation And Handsfree Telephoning - Pioneer DEH-P9300R Manual De Operación

Other Functions
U
sing the AUX source
An IP-BUS-RCA interconnector such as the
CD-RB20 or CD-RB10 (sold separately) lets
you connect this product to auxiliary equipment
featuring RCA output. For more details, refer to
the IP-BUS-RCA interconnector's owner's man-
ual.
Selecting AUX as the source
• Press SOURCE to select AUX as the
source.
Press SOURCE until "AUX" appears.
Entering the AUX title
The title displayed for the AUX source can be
changed.
1. Press SOURCE to select AUX as the
source.
Press SOURCE until "AUX" appears.
2. Press FUNC and then press TTLin to
select the AUX title input mode.
Refer to "Entering disc titles" on page 26,
and perform procedures 3 to 7 in the same
way.
Note:
• Even if you do not press TTLin you can enter the
title, but you will not be able to change the charac-
ter types.
51
All manuals and user guides at all-guides.com
U
sing the telephone muting/
attenuation and handsfree tele-
phoning
Telephone muting/attenuation
Sound from this product is muted or attenuated
automatically when a call is made or received
using a connected cellular telephone.
When "Mute" is selected, telephone muting/
attenuation is activated. (Refer to page 46.)
Note:
• The sound turns off, "MUTE" or "ATT" is displayed
and no audio adjustments, except volume control,
are possible.
• Operation returns to normal when the phone call is
ended.
Handsfree telephoning
When a call is received or made using a hands-
free telephone unit, sound from this system is
muted automatically and the voice of the person
on the line comes from the speakers.
When "Telephone" is selected, handsfree tele-
phoning is activated. (Refer to page 46.)
Note:
• When a call is being made or received, no source
change is possible.
• When a call is being made or received, no audio
adjustments, except volume and the fader/balance
control, are possible.
• Operation returns to normal when the phone con-
nection is ended.
• The telephone standby can be selected as the
source when the telephone standby setting is on.
(Refer to pages 8 and 46.)