All manuals and user guides at all-guides.com
function & installation
FUNCTION
Protective Film over Front Glass
1
- Remove this film before operating the camera.
Focus/Zoom Screws
2
- To widen the viewing angle turn the Zoom screw to "W"(Wide), to obtain a closer view
turn it to "T"(Tele).
- After adjustment of the viewing angle then turn the Focus screw to "N"(Near) or "
until the sharpest focus is achieved.
DC Level Volume Cap
3
- Loosen this Cap on the camera body to adjust DC Iris Level.
- For a brighter screen turn DC level volume to clockwise, for a darker screen turn it to
counter-clockwise with a (+) driver.
Service Video Port
4
- As Sub-video Port open this cab connecting service video cable and connect it to portable
monitor and then check a picture position through portable monitor and adjust a viewing
angle and focus of the camera.
Bracket (Cable Inside Type)
5
- Using the three supplied screws fix bracket to mounting surface.
"(Far)
function & installation
_03