Toshiba CAMILEO BW20 Guia Del Usuario página 52

52
Troubleshooting
Problem / Situation
When the camcorder is
connected to the PC via
USB cable, many
Autoplay windows may
pop out. They indicate
the 'disks' of the
camcorder.
How do I charge the
battery?
Recommendation / Solution
[DV] indicates the internal memory of the camcorder.
[Removable Disk] indicates the external memory
(memory card installed in the camcorder).
The disk [DVAP] shows the built-in CAMILEO
UPLOADER application is saved at this disk. Please
DO NOT format this disk or delete the application
inside; otherwise, the CAMILEO
cation can not function.
You must use the AC Adaptor (sold separately) or the
USB cable. The camcorder must be turned OFF. A
blinking light confirms the camcorder is currently
charging. A steady light indicates that charging has
been completed. The light turns off automatically
after battery is fully charged (In AC charging Mode).
Do not format the disk or delete the application, or the CAMILEO
Uploader application may not function.
®
®
UPLOADER appli-
®