TUBESCA-COMABI GENERIS 750 Instrucciones De Montaje Y De Uso página 74

3-1-11 –Stabilisers S1 assembly
Before proceeding with the assembly, ensure that the stabilisers are already installed.
• Stabiliser S1 applies to G750 up to 5.80m platform and G950 up to 2.80m platform.
• Stabiliser S2 applies to G750 from 5.80m to 8.80m platform and G950 from 2.80m to
8.80m platform.
• Stabiliser S3 applied to G750 and G950 between 8.80m and 11.50m platform.
1. Starting with the top clamp, secure the stabilisers to the upright just below the 4
and then between the 1
2. Lock the 2 clamps with the flange nuts.
3. Adjust the leg according to the inclination of the ground.
4. Repeat steps 3 times.
1
106-A000035745 - ind.0 – 11/2021
st
and 2
4
nd
rungs.
th
2
3
Check "length" and "width"
according to table §2-3.
rung,
74