Publicidad
Idiomas disponibles
Idiomas disponibles
4 | OR B EA
0 1 TURNING RISE ON/OFF
TO TURN RISE H ON
Press the power button on the lower part of the frame once.
TO SWITCH RISE H OF F
Press and hold for 3 seconds the power button on the lower part of the frame until the button´s light fades off.
3 sec.
QUICKSTART GUI DE
R ISE · H YDRO 2022
0 2 CHANGE BETWEEN
ASSIST MODES
Press the buttons X or Y of the Shimano handlebar remote
switch to change between assist modes. Press X to increa-
se the assist mode up to the maximum available (Boost).
Press Y to decrease the assist mode down to the No-Assist
mode (Off).
CU RREN T ASSIST M ODE DISPLAY
When changing the assist mode, the current mode will be
visible on the Shimano EW-EN100 junction (assemblies
3 sec.
WA L K ASISST
To activate Walk Assist, press the handlebar remote lever
OFF
switch button Y for 1 second until the word WALK appears
on the Shimano display or the LED2 of the EN100 junction
shows a dark blue light.
without display), on the Shimano display and/or your com-
patible Garmin unit with the Orbea RS Toolbox data field
installed and connected to Rise.
Read the Orbea RS Toolbox section of this guide and the
Rise Hydro Bluepaper to download, unlock and install Or-
bea RS Toolbox on your compatible Garmin device.
OFF
X
OFF > ECO > TRAIL > BOOST
Y
BOOST > TRAIL > ECO > OFF
Release the Y button and press it again to engage Walk
Assist. The system will help you push the bike along as
long as the Y button is pressed.
WALK
Y
1 sec.
O RB EA | 5
EN
LED 2
SHIMANO
EW-WN100
OFF
ECO
TRAIL
BOOST
SHIMANO
DISPLAY
ORBEA RS
TOOLBOX
Release
& Hold
Publicidad
