General Power Tool Safety Warnings - Makita DFL650F Manual De Instrucciones

Atornillador angular inalámbrico
Ocultar thumbs Ver también para DFL650F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH (Original instructions)
SPECIFICATIONS
With battery BL1815
Fastening
With battery BL1815N / BL1820 /
torque
BL1820B / BL1830 / BL1830B /
BL1840 / BL1840B / BL1850 /
BL1850B / BL1860B
No load speed (RPM) *
Standard battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
1
• *
No load speed is adjustable with exclusive application.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
Model
Hard joint
Hard joint
Square drive
1
Dimensions
Net weight
Rated voltage
Soft joint
Soft joint
BL1815 / BL1815N / BL1820 /
583 mm x 75 mm x 116 mm
(23" x 2-15/16" x 4-9/16")
2.5 kg (5.5 lbs)
GEA006-2
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
2
DFL650F
25 - 58 N • m (18 - 43 ft • lbs)
25 - 50 N • m (18 - 37 ft • lbs)
25 - 65 N • m (18 - 48 ft • lbs)
9.5 mm (3/8") or 12.7 mm (1/2")
80 - 200 /min
BL1830 / BL1830B / BL1840 / BL1840B /
BL1820B
600 mm x 75 mm x 116 mm
(23-5/8" x 2-15/16" x 4-9/16")
D.C. 18 V
BL1850 / BL1850B / BL1860B
2.7 kg (6.0 lbs)

Publicidad

Tabla de contenido
loading

Tabla de contenido