TFA_No. 60.2511_Anleitung_
19.07.2010
Radio controlled alarm
• Confirm with ALARM button.
• Set minutes in the same way.
• Confirm with ALARM button.
• Press ALARM button again.
• The alarm symbol appears on the display and the alarm is activated.
• Once the alarm starts to ring, the alarm symbol flashes.
• Press any button to stop the alarm.
• You can activate the snooze function by pressing the SNOOZE/LIGHT button.
• Zz flashes and the alarm will be interrupted for 5 minutes.
• You can activate the snooze function up to 7 times.
• To turn off/activate the alarm function, press ALARM button.
• The symbol disappears/appears on the display.
26
11:20 Uhr
Seite 14
Radio controlled alarm
5. Backlight
• Press SNOOZE/LIGHT button.
• The backlight will light for 5 seconds.
6. RESET function
• If the unit does not work properly use a pin to press the RESET button.
7. Battery replacement
• Replace the batteries when the display becomes weak.
• Use alkaline batteries only. Observe correct polarity. Low batteries should be changed soon
to avoid the damage resulting from a leaking battery. Batteries contain harmful acids.
Wear protective glasses and gloves when handling with leaked batteries.
27