Greencut GE8010E Manual De Instrucciones página 50

50
CARE, TRANSPORTATION AND STORAGE OF THE MACHINE
• Use this machine, accessories, supplies, etc. in accordance with these instructions and in the manner intended,
taking into account the working conditions and the work to be carried out.
• Check that all safety elements are installed and in good condition. Do not use this machine if any of its
components is damaged.
• Regularly check the tire pressure: minimum 1.5 bar and maximum 1.9 bar.
• Do not force this machine. A correct use for the type of work to be done will allow you to work better and more
safely.
• Do not modify the controls of this machine.
• If the machine vibrates abnormally stop the engine, inspect the machine for the possible cause and repair it. If
you can not find the reason, contact the Official Technical Service.
• Reduce the speed of the engine when turning it off. If the engine is equipped with a fuel shut-off valve, use it
when the engine has stopped.
• Always clean the machine when you finish the work. Do not use grease solvents. Keep especially clean the fuel
tank, its surroundings and the air filter.
• Carry out periodic maintenance of the machine. Do not attempt any maintenance or repair work that is not
described in this instruction manual. We recommend that maintenance and repairs not described in this manual
be carried out by the Official Technical Service.
• Before making adjustments or repairing the machine, stop the engine and remove the spark plug wire. These
safety precautions reduce the risk of starting this machine accidentally.
• Never attempt to make engine adjustments while the unit is running.
• Always make engine adjustments with the unit resting on a flat, clear surface.
• Check that moving parts are not misaligned or locked, that there are no broken parts or other conditions that
may affect the operation of the machine. Whenever damaged, repair it before use.
• Keep cutting instruments sharp and clean.
• Keep handles dry and clean. Dirty grips can cause a loss of control.
• To carry out the transport of the machine, make sure that the engine is stopped and that it is correctly secured so
as to prevent it from overturning, spilling fuel or being damaged.
• Store the product out of the reach of children.
SERVICE
• Have the machine checked periodically by a qualified technician using only original spare parts. For the avoidance
of doubt, contact the Official Technical Service.