Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the grinding fineness:
You can set the grinding fineness (L) with the help of the
lever.
To set the grinding fineness, proceed as follows:
- Place a cup under the coffee dispensing spout.
- Press OK (button 6) to prepare the coffee.
- Adjust the grinding fineness with the grinding fineness
lever (L) while the grinder is running. The coffee is pre-
pared and the grinding fineness is set.
The setting is implemented as follows:
Note:
For light roasted coffee beans, set the grinding mecha-
nism to "fine".
If the grinding fineness is set too fine, the coffee will be
dispensed a drop at a time.
For dark roasted coffee beans, set the grinding me-
chanism to "coarse". If the grinding fineness is set too
coarse, the coffee will be dispensed too quickly.
Preparing coffee with whole coffee beans:
To prepare coffee with whole coffee beans, proceed as
follows:
-Set one or two cups, or if pots are selected, a pot with
the appropriate volume (500 or 1000 ml) under the
coffee outlet (D).
- In order to reduce heat loss and splashing, adjust the
dispensing spout height to suit your cup size by moving
it up or down.
Select the desired cup size by pressing the button 4.
The following selections are possible:
Jar of coffee
approx. 190ml
Cup of coffee
approx. 120ml
Cup of espresso
approx. 40ml
Note:
The selection of cup size is only possible in one or
two-cup mode. The default factory setting (approx. 120
ml per cup) is set for the four or eight cup mode in the
pot selection. The coffee machine is set for standard
quantities for each cup size by default.
-Select the desired ground coffee quantity by pressing
the button 5
The following selection are possible:
Note:
An automatic grinding quantity correction measures the
ground coffee quantity and adapts this gradually to the
set value for the coffee strength. This compensates the
differences between the grinder and various different
coffee varieties. It may therefore be necessary to brew 5
times until the correction is perfect.
The last-selected ground coffee quantity remains set for
each cup size.
The set ground coffee quantity remains stored even
when the coffee machine is switched off.
-Select the required number of cups or pot size by
pressing button 3.
The following selections are possible:
Publicidad
