PNI P15UV Manual De Usuario página 23

Example no. 2
Programming a simplex channel with CTCSS tone
Save on channel 10:
RX = 432.6625 MHz
Tone TX CTCSS 123.0
1. Long press the MENU key to switch to VFO frequency mode. The VFO icon appears on
the screen on the right.
2. Run the key sequence [MENU] [2] [9] [MENU] [1] [0] [MENU] [EXIT] to delete all data
previously stored on channel 10.
3. Execute the key sequence [MENU] [1] [3] [MENU] 123.0 [MENU] [EXIT] to enter the TX
encoding tone.
4. Press the [EXIT] key to move the cursor to the frequency.
5. Enter the RX frequency (Ex. 43266250)
6. Execute the key sequence [MENU] [2] [8] [MENU] [1] [0] [MENU] to select the channel
(for example: 10)
7. Press the [EXIT] key. The channel has been saved.
8. Hold down the MENU key to switch to MR channel mode. The saved channel number will
appear on the screen.
23 User manual