AmazonBasics B07NDJTS6S Manual Del Usuario página 14

Ocultar thumbs Ver también para B07NDJTS6S:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Problem
The shredder is
constantly running
while in "Auto (On)"
mode.
Specifications
Sheet capacity:
Paper shred size:
Paper feed slot width:
Credit card & CD capacity:
Duty cycle:
Voltage:
Shreds credit cards, small paper clips, staples and CDs/DVDs.
* One Folded Sheet Of Paper Equals 2 Sheets Of Paper
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
14
Solution
• It is possible that the activation sensor, which starts the shredder, has
become blocked with paper. Insert an index card or any rigid sheet
of card stock (old greeting card or folded file folder) directly into the
center of the feed slot while applying force to help push the jammed
paper through. This will usually clear any paper blocking the activation
sensor and feed slot.
• The activation sensor is being triggered by dust, debris, or oil. A
cotton swab may be used to clean the sensor. Do not use canned air.
The activation sensor of the shredder is located around the center of
the feed slot.
8 Sheets of 20 lb bond paper*
5/32 in x 15/32 in pieces
4 mm x 12 mm pieces
8.7 in (22.0 cm)
1 at a time
5 min on / 30 min off
120 V~, 60 Hz / 3.5 A

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido