How To Use - Duronic HS90 Manual De Instrucciones

Garment Label
FIRST USE
Fill the water tank using the jug provided.
Plug in and switch on the iron and allow it to heat up for 5 minutes before
using at the first time. Then switch the iron off, unplug the cable and empty the
water from the iron.
FILLING THE IRON
Only fill the iron with water if you intend to use the steam function. For
dry ironing, you do not need to fill the tank with water.
1. Make sure the iron is turned off and unplugged from the mains socket.
2. Fill the water jug with fresh water from the tap. If you live in a hard water
area, it is advisable to use distilled water. Avoid using water containing
softeners, perfumes or additives.
Ironing Temperatures
Fabric Type
Synthetic
Silk-wool
Cotton-linen
Fabric not to be ironed

How to Use

10
Thermostat
Regulation
Low temperature
Medium temperature
High temperature