Duronic HS90 Manual De Instrucciones página 12

1. Place the iron onto the heatproof stand
or on the designated heatproof
iron-resting surface on your ironing
board.
2. Press the handle rotation button and turn
the handle until it locks in place.
3. If choosing to use the steam function, fll up
the iron with water using the jug provided.
4. Plug in the power cable into the mains socket and switch on. This will
the iron into standby mode and the power button will fash orange.
put
5. Press the power button to turn on the iron. The button will fash blue and
continue to do so while the iron is heating
up.
6. Once it has fnished heating up and reached the optimal temperature,
the
power button light will stop fashing and remain constantly blue.
7. If you wish to use the iron Dry Mode without steam, it is now ready to
use.
8. If you wish to use the iron with the Steam Mode, select the level of
steam you need:
• Press the steam button once for less steam (this will light up
orange)
• Press the steam button twice for more steam (this will light up
blue)
Note: You can return to Dry Iron Mode by pressing the steam button for
the third time.
Using the Iron
12