Duronic HS90 Manual De Instrucciones página 13

9. Iron your garment as you normally would on an ironing board.
10. If you are using the Steam Mode and notice that the water level goes too
low and you haven't finished ironing, switch off and unplug the iron. Refill it
using the water jug. Then follow steps 5-8 again to continue ironing.
11. If you need to put the iron down to handle the fabric, place the iron on the
designated heatproof iron-resting surface on your ironing board or the
heatproof stand provided.
12. When you have finished ironing, press the power button to turn it off. The
power button will flash orange again to let you know that it's in standby
and switched on still at the plug.
13. Switch it off at the plug and unplug it from the wall socket.
14. Allow the iron to cool down completely. Once cool, empty the water tank.
15. Press the handle rotation button and turn the handle into the closed
position.
16. Store away using the storage bag
provided.
13