Duronic HS90 Manual De Instrucciones página 8

• Ensure that the iron is switched off and unplugged from the electrical
mains socket and fully cooled down before storing away.
• Do not use any attachments which are not listed in this manual.
• Always hold the iron by the handle. Keep the hot soleplate away from
body parts and heat-sensitive objects.
• Do not turn the iron upside down; there may be hot water in the water
tank.
• Do not leave water in the water tank when the iron is not in use - this can
corrode and damage the soleplate.
• Keep the iron well away from surfaces and objects that can be damaged
by heat.
• Ensure there is adequate space to operate the iron.
• When not ironing, place the iron down onto the iron base, on a level
surface.
• When ironing garments, use this iron only with a purpose-built ironing
board, on a flat even surface.
• Observe all of the ironing instructions and ironing temperature dot settings
given by the garment manufacturer. These guidelines are normally on the
label/s inside the garment.
• Always ensure the water filling does not exceed the MAX mark.
• Always switch off and unplug the iron when refilling the water tank.
• Do not fill the water tank with hot water or corrosive cleaning agents which
could cause damage to the iron.
• Do not iron buttons or fasteners. This could damage the iron soleplate.
8