Duronic HS90 Manual De Instrucciones página 91

The steam function is mainly used for thick
materials or fabrics with stubborn creases.
If you want to use the steam function, you
will need to select the appropriate setting as
illustrated.
Fill the tank with full water and turn on the iron.
Select a steam function and hold the iron
horizontally for a few seconds to allow the steam
to flow through and clean the steam vents.
Place the iron onto the fabric and you will see the steam start to penetrate the
fabric as you continue to iron.
Do not use the iron at the angles shown below as the pump will
not be able to sufficiently pump water through the iron to produce
steam.
Steam Function
92