Installing The Built-In Electrode Arm; Installing Power Adapter - OHAUS STARTER 2100 Manual De Instrucciones

EN-6
2.2

Installing the built-in electrode arm

Install the built-in electrode arm on the left or right sight of the STARTER 2100 meter.

Remove the rubber hole cover from the meter

Insert the metal stick into the hole and screw to fasten it.

Install the upper electrode arm upon the metal stick from above; adjust it to a desired height.
2.3

Installing power adapter

Choose the proper adapter clip, insert into the power adapter slot.
STARTER 2100 Bench pH Meter