OHAUS STARTER 2100 Manual De Instrucciones página 8

EN-4
Controls
Button Press & release
- Start measurement or lock
current reading
- Confirm temp setting
- Start calibration
- Meter turn on
- Exit, return to measurement
screen
- Entered temperature setup mode
- Increase temp. value when in
temp. setup mode
- Switch between pH and mV
measuring modes
- Decrease temp. value when in
temp. setup mode
- Start self-diagnosis
STARTER 2100 Bench pH Meter
- Review the latest calibration
data (slope, offset)
- Meter turn off
Press & hold
for 3 seconds