Setup; Set Mtc Temperature - OHAUS STARTER 2100 Manual De Instrucciones

EN-8
3

SETUP

3.1

Set MTC temperature

Please note:
If a temperature electrode is used, Automatic Temperature Compensation (ATC) and the sample
temperature are displayed on the screen. You may then choose to skip MTC setup (below).
If the meter does not detect a temperature electrode or one is not used, the meter automatically
switches to Manual Temperature Compensation (MTC) mode and MTC appears on the screen.
MTC can be set as follows:

Press button-

Next use button-
temperature of your sample.

Press button-
press button-
The default MTC temperature value setting is 25 ° C (77°F).
Note: ° C = 5/9 (° F -32)
STARTER 2100 Bench pH Meter
and the MTC temperature value appears on the display.
or button-
to confirm the setting then return to the measurement screen; or
to reject the setting and return to the measurement screen.
to increase or decrease the value to the