Technical Data - Gude GE 235 TC Instrucciones De Uso Originales

Environment Protection:
Cardboard packaging
Dispose of the waste in
material may be
an environment-aware
delivered to a salvage
manner.
point for recycling.
Packaging:
Packaging placing
Protect from rain

Technical Data:

Mains connection
Product-specific:
Manual arc welding
Short circuit protection
with coated electrode
transformer Electrode holder
U se in Com plia nc e w it h De t e rm ina t ion
The welding unit is designed for metal welding using electrodes. The units and any accessories on the
welding site are meeting respective provisions when delivered.
The manufacturer shall not be held liable for any damages if the generally valid regulations and provisions
contained herein are not observed.
Re sidua l H a za rd a nd Pre ve nt ive Ac t ion
Electrical Residual Hazards
Threat
Indirect electric contact
Residual heat hazards
Threat
Burns, frostbites
Radiation hazard
Threat
Infrared, visible and UV light
Defective electric and
electronic devices or
those to be disposed of
should be delivered to
a salvage point for
recycling.
Fragile!
direction – up
Weight
The machine may be
used in the electrical
shock hazardous areas
Earthing tongs
Description
Simultaneous contact with
earthing terminal and the
electrode cable may result in
electrical shock.
Description
Contact with the piece to be
welded may cause serious
burns.
Splashes released in the
course of welding may harm
both the welder and his
clothing.
Description
Looking in the arc may result in
severe injury of eyes ,
Electrode diameter
according to welding 230 V connection
current
Downward
Mains connection
characteristic
Preventive Action
prevent contact
Preventive Action
Do not touch the piece being
welded use protective gloves
Wear protection clothing
Preventive Action
Always use welder protection
shield
GB
400 V connection
Temperature indicator
Residual Hazard
Indirect electric contact
Residual Hazard
Burns, frostbites
Residual Hazard
Infrared, visible and UV light