English - IKEA TRÅDFRI Manual Del Usuario

English

PAIRING A STEERING DEVICE
TO YOUR CONTROL OUTLET
When the control outlet is sold together with a wireless
ON/OFF switch (in the same package), they are already
paired.
To add more control outlets, just repeat the steps below:
1. Make sure that your control outlet is plugged in and the
main power is turned on.
2. Hold the steering device close to the control outlet you
want to add (no more than 5 cm away).
3. Press and hold the pairing button
seconds , you can find the pairing button under the
rear cover. A red light will shine steadily on the ON/OFF
switch. On your control outlet a white light will begin
to dim and flash one time to indicate that it has been
successfully paired.
Up to 10 control outlets can be paired with 1 ON/OFF
switch.
Make sure to pair them one at a time. If the control outlets
are close to each other, disconnect those that have already
been paired from the wall outlet.
FACTORY RESET YOUR DEVICE
For control outlet:
Push a pin into the pinhole on bottom of the control outlet
for at least 5 seconds.
for at least 10
4