Dismantling; Storage; Frequently Asked Questions (Faq) - Bestway Roal Frame Pool Manual De Instrucciones

1. Unscrew the drain valve cap on the outside of the pool counter clockwise and remove.
2. There are 2 garden hose adaptors, choose the appropriate size to fit your hose.
3. Connect the adaptor to the hose and put the other end of the hose in the area where you are going to drain your pool. (Check local regulations for drainage
by-laws).
4. Screw control ring of the hose adaptor onto the drain valve clockwise. The drain valve will be open and water will start to drain automatically.
ATTENTION: Water flow can be controlled with the control ring.
5. When draining is finished, unscrew the control ring to close the valve.
6. Disconnect the hose.
7. Screw the cap back onto the drain valve.
8. Air dry pool liner.
ATTENTION: Do not leave the drained pool liner outside.
1. Please remove all the accessories and spare parts of the pool and store them clean and dry.
2. Once pool liner is completely dry, sprinkle with talcum powder to prevent pool liner from sticking together, fold pool liner carefully. If pool liner is not completely dry,
mould may result and will damage the pool liner.
3. Store liner and accessories in a dry place with a moderate temperature between 41°F / 5°C and 100°F / 38°C.
4. For long-term storage in winter, be sure the pool is completely dry and clean.

Frequently Asked Questions (FAQ)

1. What is a suitable base for the Royale Frame Pool™ pool?
Almost any completely flat, solid, level surface can be used. Do not use sand as a leveling material as it is prone to shifting under the pool. The ground should be
dug out until it is perfectly level. Do not set up on driveways, decks, platforms, gravel or asphalt. The ground should be firm enough to withstand the weight and
pressure of the water: mud, sand, soft / loose solid or tar are not suitable. A concrete base can be used but care should be taken not to drag the pool across the
surface as abrasions could tear the liner. If the pool is to be set up on a lawn, it is recommended that the grass is removed from where the pool will sit as it will die
and may cause odors / slime. Certain types of hardy grass can grow through the liner as can aggressive bushes / plants by the side of the pool. Ensure adjacent
vegetation is cut back where necessary. Use of a ground cloth assists in protecting the base of the pool.
2. How will I know if my pool is set up on unleveled ground?
If your pool appears to be bulging on one side it is not set up on level ground. It is important that you empty your pool and move the pool to a level site. If the pool
is not on level ground it will place undue stress on the seams and could result in the seams bursting, which will cause flooding, property damage and potentially
personal injury or death.
Fill your pool following the instructions in the owner's manual carefully. This will ensure that you do not waste water and the pool can be moved easily so that the
ground can be leveled at an appropriate time and not after you have completely filled it with water.
3. Can I have my pool filled by a water service?
We recommend using a garden hose under low pressure for filling your pool. If it is necessary to use a water delivery service, it is best to fill the pool with one
inch of water by hose and smooth wrinkles first. Use a water service that is able to regulate the flow of water to prevent damage. Ensure you stop at each step as
noted in the instruction manual to ensure your pool is level. Bestway will not be held responsible for pools damaged or weakened by water delivery services.
4. What is the maximum fill height of the pool?
Fill pool until water capacity is 90% up to the bottom of the top rail of the pool. Never attempt to fill your pool beyond the base of the rail. We recommend leaving
extra room to account for water displacement when occupants are inside the pool. You may have to top up the water during the season, which has been lost through
evaporation or normal use.
5. My pool is leaking, what do I do to fix it?
The pool does not need to be emptied to fix any holes. Self-adhesive underwater repair patches can be purchased at your local pool / hardware store. For
external use, use the repair patch provided. For internal holes, clean the hole on the inside of the pool to wipe off any oils and algae. Cut a circle large enough to
cover the hole and apply the patch securely onto the side in the water. Cut a second patch and apply to the outside of the pool for extra strength. If the hole is in the
base of the pool use one patch only and weigh it down with a heavy object while it bonds. If you have patched the pool when it is empty we recommend you leave it
at least 12 hours before filling.
6. How many times a year should I change the water?
This is dependant on the amount of use the pool receives, and the attention paid to covering the pool and keeping chemicals properly balanced. If maintained
correctly the water should last a full summer season. Please contact your local pool chemical supplier for detailed information regarding chemicals, they will be able
to advise you how to best maintain the cleanliness of your water.
7. Do I need to take my pool down for the winter?
Yes. Above-ground pools may collapse under the weight of ice and snow and the PVC walls will be damaged. We recommend taking the pool down when
temperatures fall below 45 ºF / 8 ºC. The pool should be stored indoors in a moderate temperature between 41 ºF / 5 ºC and 100 ºF / 38 ºC. Please store away from
chemicals and rodents and out of the reach of children.
8. My pool is fading – why is that?
Excessive use of chemicals can cause the color of the inside of the liner to fade; this is similar to a swimsuit fading over time from repeated contact with
chlorinated water.
9. How many years will the pool last?
There is no set time limit for the pool to last; following the instructions in the owner's manual and with proper care, maintenance and storage you can
considerably increase the life of your pool. Improper set-up, use or care can result in failure of the pool.
10. Do you recommend the use of a filter pump with a Bestway pool?
Absolutely! We strongly recommend you the use of a filter pump, which could maintain the water of the pool clean.
11. Which are the most important functions of my filter pump?
The most important function of a filter pump is the elimination of every sort of impurity from the water by the aid of a filter cartridge and chemical products for its
sterilization.
All manuals and user guides at all-guides.com

Dismantling

Storage

7
Bestway
®
S-S-000856